647725
50
Zoom out
Zoom in
Previous page
1/104
Next page
42
Edit Name Set Modulation P25 Threshold Mode
Set Site Type Set Attenuator P25 Threshold Level
Edit Band Plan Set Avoid Delete Site
Set Frequencies Set Location Information New Site
P25 Waiting Time
Edit Name
See Data Naming.
Set Site Type (EDACS Only) – EDACS Wide is the same as EDACS Standard and use a 9600
baud control channel. EDACS Narrow-band sites use a 4800 baud control channel.
Wide (Standard) or Narrow. The default setting is Wide.
Edit Band Plan (Motorola/P25 Only) – Band plans are required so the scanner can correctly
determine the voice channel frequencies.
P25 Systems. Explicit mode systems (which comprise most systems in use) include all
information needed to determine voice frequencies on the control channel, leave all entries
blank. The system will automatically detect the band plan and ll in the entries. Implicit
systems need you to supply the systems band plan with the Custom option for the scanner
to correctly determine voice frequencies.
Select Plan - Scroll to each Band Plan 0-9, A-F, and press E/yes.
Input Base Freq - Enter the base frequency press E/yes.
Input Spacing - Enter the step size and press E/yes.
Press Menu to return and repeat for each band plan as needed.
Motorola Systems
800/900 Standard or 800 Splinter
The scanner will use the regular Motorola band plan.
Custom (rebanded) Motorola/VHF/UHF Systems. Custom band plans require that you
enter both a lower and an upper base frequency value. The lower base frequency (or base)
is always the base frequency as provided in the Radio Reference Database.
Use this Excel spreadsheet to calculate the upper base frequency value located at:
http://info.uniden.com/twiki/pub/UnidenMan4/CalculatingUpperBaseFrequencies/
CustomBandPlanCalculator.xls
If you don’t have Excel you can download and install a viewer here, or do a simple Google
search.
The upper base frequency can also be found using the Band Plan Calculator located at:
http://info.uniden.com/twiki/bin/view/UnidenMan4/CalculatingUpperBaseFrequencies.
Also, look at Determining Base/Step/Offset for VHF/UHF Motorola Systems at Radio
Reference.com.
For Standard 800 MHz Rebanded Systems, you need to set Band Plan 1 and Band Plan 2
as follows:
Band Plan Lower Base Freq Upper Base Freq Offset Polarity Spacing
1 851.025 854.000 440 + 25 kHz
2 851.0125 868.9875 0 + 25 kHz
Select Plan 1-6 Select for each Band Plan.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD536HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD536HP in the language / languages: English as an attachment in your email.

The manual is 7,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info