647725
17
Zoom out
Zoom in
Previous page
1/104
Next page
9
BCD536HP
INSTALLING YOUR SCANNER
The BCD536HP can be placed on a convenient surface in your home as a base station, and
connected to a standard outlet that supplies 120VAC, 60Hz. You must use either the supplied
antenna or an electrically correct outdoor antenna, properly and safely mounted at your chosen
site.
The unit can also be placed above, beneath, or in the dash of your vehicle using the supplied
bracket and mounting hardware.
If your scanner receives interference or electrical noise, move the scanner or its antenna
away from the source.
Do not use the scanner in high-moisture environments such as the kitchen or bathroom.
Avoid placing the scanner in direct sunlight or near heating elements or vents.
POWER RELATED ISSUES
Important: To prevent memory from being corrupted, do not unplug the AC adapter during the
time the memory is accessed for programming or auto store.
Note 1: If when you connect the AC adapter the [VOL] /Power Switch is ON, the scanner
may not power on. Should this occur, simply turn the control OFF, then ON again.
Note 2: When you turn off the scanner using the power switch, the scanner remembers the
last settings and mode. When you turn power back on, it resumes the previous mode.
CONNECTING AN OPTIONAL ANTENNA
The scanner’s BNC connector makes it easy to connect a variety of optional antennas, including
an external mobile antenna or outdoor base station antenna.
Note: Always use 50-ohm, RG-58, or RG-8, BNC terminated coaxial cable to connect
an outdoor antenna. If the antenna is over 50 feet from the scanner, use RG-8 low-loss
dielectric coaxial cable. Cable loss increases with higher frequency.
CONNECTING AN EXTENSION SPEAKER
In a noisy area, an optional amplied extension speaker, positioned in the right place, might
provide more comfortable listening. Plug the speaker cables 1/8-inch (3.5-mm) mini-plug into your
scanners back-panel Ext. Sp. Jack.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD536HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD536HP in the language / languages: English as an attachment in your email.

The manual is 7,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info