Manual Uniden BCD396T (page 131 of 154) (English)

647723

131

Zoom out

Zoom in

1/154

131

Appendix

User Defined Fleet Maps

Type I Programming Information

When a Type I system is designed, the address

information for all the ID’s is divided into 8 equal sized

blocks, numbered 0–7. When you program your

scanner to track a Type I system, you must select a

size code for each of these blocks. When you have

assigned a size code to all 8 blocks, you’ll have

defined the fleet map for the system you are tracking.

Each size code determines the number of fleets, sub

fleets, and ID’s each block will have. For example, a

size code of S-4 has one fleet, which is divided into 16

separate subfleets, and it has a total of 512 individual

ID’s.

When a block is assigned a size code, the fleet or

fleets created within the block are assigned a Type I

ID. The way these ID’s display on your scanner

depend on the block number and the block’s size

code. When a Type I ID appears, the leftmost digit

represents the block which contains the ID.

The next 2-3 digits identify which fleet is active, and

the last digit(s) identifies the subfleet.

The details concerning how the size codes are

selected by a Type I System designer are highly

dependent on the specific needs of the system’s

users. Some organizations might want many subfleets

with only a few radios each, while another organiza

tion might want only a few subfleets with many radios

each. Your task is to program your fleet map with the

same size code assignments as the trunked system. If

you do this accurately, you’ll track all the Fleet-Sub

fleet combinations used by the system. In other words,

you’ll hear complete communications while monitoring

a trunked system.

If you don’t already know the size codes used, you’ll

have to guess at them. But since you don’t have to

figure out all the blocks at once, this isn’t as hard as it

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD396T in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Uniden BCD396T Manual

Product: