647706

Uniden BCD325P2 Manual

108
Zoom out
Zoom in
Previous page
1/132
Next page
108
5. To turn Intermediate Frequency Exchange on or off press Func then 4(ifx).
6. To turn the attenuation on or off press Func then 7(att).
7. To store a frequency press E/yes then see Storing a Displayed Frequency.
8. To go to the Weather Menu in any weather mode press Func then Menu.
Weather Alert Priority turning the weather alert priority feature on allows the
scanner to check the weather channels every 5 seconds for a 1050 Hz weather
alert signal and still scan or search. If you should receive an alert, you will hear a
loud warbling then the weather channel audio. You will see WX in the display when
Weather Alert Priority is on.
Warning! If you receive an alert it will be at FULL volume.
Note: You can also toggle weather alert priority in scan or search modes by
pressing the WX button.
1. Scroll to ‘WX Alt Priority’ and press E/yes.
2. Scroll to On or Off and press E/yes to save and exit.
Programming SAME Groups SAME (Specic Area Messaging System) is a system
developed by the National Weather Service to reduce the number of alerts received
by consumers by allowing them to hear alerts only for the county(ies) they are
interested in. Each alert contains information about the type and severity of the alert,
as well as the specic geographic locations affected by the alert. In addition, certain
special regions and wildcard settings can be assigned. Your scanner can receive all
SAME alert signals broadcast within about a 50-mile radius of where you use it.
To receive SAME alerts and broadcasts about weather occurring only in particular
counties within that area, you can program up to 5 groups of 8 FIPS codes (40
codes) into the scanners memory. This lets you avoid hearing an alert that applies to
an area within a 50-mile radius but not necessarily to your county or parish.
For the purpose of broadcasting weather information, the NWS has divided the
United States into regions by state and county (or parish, where applicable) then
assigned a 6-digit FIPS code to identify each county or parish. For example, the
code for Tarrant County, Texas, is 048439. The rst digit in a FIPS code identies
the county subdivision, the next two digits identify the state, and the last three digits
identify the county or parish. Most FIPS codes begin with 0, which means the code
represents an entire county. The NWS, however, plans to eventually subdivide some
large counties. When that happens, each subdivision will be assigned a digit from
1-9, resulting in codes such as 148439, 248439, and so on.
To obtain the FIPS code for the location where you installed your scanner call the
NWS toll free at 1-888-697-7263 (follow the instructions you hear).
… 108 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info