647706

Uniden BCD325P2 Manual

102
Zoom out
Zoom in
Previous page
1/132
Next page
102
CLOSE CALL MENU
Your scanner’s Close Call feature lets you set the scanner so it detects, alerts you
to, and displays the frequency of a nearby strong radio transmission. You can set
the scanner so the Close Call feature checks for a Close Call hit every 2 seconds in
the background while you are scanning or searching or use Close Call only mode.
It automatically displays the frequency. ‘Close Call Do-Not-Disturb’ only checks for
Close Call signals when you are not receiving transmissions. You can also set the
frequency band(s) where you want the scanner to look for transmissions. When the
scanner detects a Close Call hit, it alerts you according to the override and alert
settings. You can also set the scanner to Auto Store Close Call hits.
‘Hits with Scan’ is a special system that automatically stores the last 10 Close Call
hits until you cycle power. The system ‘Close Call’ is created when you run a Close
Call Auto Store.
The Close Call feature works well for locating the source of strong local
transmissions such as mobile and handheld two-way radios in areas with no
other strong transmission sources. Several factors affect Close Call performance.
Performance is increased with higher transmit power, receive antenna tuned to
the target band, and a low background RF level. Other than the antenna, you
have no control over these factors, but they explain why performance might vary
by both location and time. The Close Call feature works better with some types of
transmissions than others. It might not correctly display frequency information for
transmitters using a highly directional antenna (such as an amateur radio beam
antenna) or if many transmitters operate at the same time in the same area.
To Edit Close Call Options, press Menu.
1. Scroll to ‘Close Call’ and press E/yes.
2. Scroll to the options below and press E/yes.
3. Press Scan/Srch to return to scanning when done with editing.
Important! There are many options and settings in Search/Close Call Options that
affect and compliment the settings for Close Call. Please review those rst.
Note: The items below do not follow the radio’s menu order because they
should be in the following order to properly setup and use the Close Call
features. As there is no ‘Step’ setting in ‘Search and Close Call Options’, you
will have to set the step in ‘Band Defaults’.
Set CC
Bands
Set CC Override Close Call
Only
Using Close Call
Modes
Set CC Alert Set CC Mode CC Auto Store Managing Close Call
Hits
Hits with Scan
… 102 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info