647706

Uniden BCD325P2 Manual

99
Zoom out
Zoom in
Previous page
1/132
Next page
99
3. At ‘Select Store Sys’ scroll to the conventional system you want to store the
frequencies in and press E/yes.
4. At ‘Select Range’ scroll to the ‘service search’ or to ‘custom search’ to select
where to search from and press E/yes.
Note: The quick key for the system must be turned on (if one is assigned to
the system) and not locked out to select the system to store frequencies in
otherwise you will see ‘Nothing to Scan’. If no systems are programmed ‘No
System Stored’ appears.
When you have selected a service search or custom search range(s), the scanner
looks for active frequencies within the range(s) and ‘Search and Store’ appears on
the display’s lower line and the system name and search range name(s) appear on
the display’s upper line. When the scanner nds an active transmission, it checks to
see if the frequency has already been stored in the system (‘Memory Check’ in the
display). If the frequency has already been stored, the scanner continues to search.
If the frequency has not been stored, it stores the frequency into a (created) group
named ‘Found Channels’, then resumes searching. ‘Limit Reached’ will appear in the
display when the Max Auto Store value is reached.
To Auto Store IDs, press Menu.
1. Scroll to ‘Search for...’ and press E/yes.
2. Scroll to ‘Search and Store’ and press E/yes.
3. At ‘Select Store Sys’ scroll to the trunked system you want to store the IDs
in and press
E/yes.
4. At ‘Select Site’ scroll to the site you want to store the IDs in and press E/yes.
Note: The quick key for the system must be turned on (if one is assigned to
the site) and not locked out to select the system to store IDs in otherwise
you will see ‘Nothing to Scan’. If no systems are programmed, ‘No System
Stored’ appears. Search and store does not work if an EDACS SCAT system is
selected.
‘ID Search and Store’ appears on the display’s lower line and the system name
appears on the display’s upper line. When the scanner nds an active transmission,
it checks to see if the ID has already been stored in the system (‘Memory Check’
in the display). If the ID has already been stored, the scanner continues to search.
If the ID has not been stored, it stores the ID into a (created) group named ‘Found
Channels’, then resumes searching. ‘Limit Reached’ will appear in the display when
the Max Auto Store value is reached.
Quick Search
Quick Search allows you search from the currently-tuned frequency if you are
scanning, or enter a frequency to start searching from. Quick Search will search all
the way up to 960 MHz or all the way down to 25 MHz then start over.
… 99 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info