647706
88
Zoom out
Zoom in
Previous page
1/132
Next page
88
The Band Scope feature lets you have the scanner provide a visual representation
of radio activity in a frequency band. The screen is arranged with the frequencies
increasing in value from left-to-right, and a signal strength meter for signals. Band
Scope Mode searches a frequency range and displays the signal level in real time.
You can set the center frequency and span of the frequency range. In Hold Mode,
you can monitor the displayed frequency.
The scanner rapidly sweeps between the endpoints of the selected frequency range
and updates each bar segment with the relative signal strength in each pass. You
can use the band scope in normal mode (the bars are all updated with the most
recent signal strength) or ‘Max Hold Mode’ (the bars update only if there is a stronger
signal than one previously stored for the current position).
This feature allows you to get a “picture” of spectrum activity across the selected
range, identify intermittently active frequencies, check antenna performance, check
coax quality, verify coverage areas, and identify interference.
USING BAND SCOPE MODE
To start Band Scope mode Hold on any channel and press Func then 3(Sr 3) to start
Band Scope mode at the frequency you held at. Band Scope mode is assigned to
this Search Key (3) by default.
Search Mode ‘SRCH’ shows in the display and the scanner searches and displays
the signals of the frequency range in real time. The frequency range is shown in
32 bars determined by the center frequency and span. While searching, the center
frequency icon and the bar which shows the current frequency blink. The scanner
starts from the lowest frequency of the frequency range and searches to the highest
frequency of the frequency range. If the scanner nds a transmission, the scanner
displays the strongest and most current signal level in the bar for each frequency in
the range.
Max Hold Search Mode ‘MAX’ shows in the display and will freeze the signal
strength bars at their strongest signals.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info