647706
83
Zoom out
Zoom in
Previous page
1/132
Next page
83
Press Func (or press and hold Func to view longer) to view the current system and
channel number shown in the top left corner of the display as “T000. 000”.
For example “T002. 043” would indicate the current system is 2 and the current
channel is 43.
To Go to a Channel in the Current System Hold on the current system. Enter the
channel number and press Menu. Press Hold to resume.
To Go to a Channel in a Different System Hold on any system.
Enter the system number, press .no, then the channel number and press Menu.
Press Hold to resume.
To Go to a System or Custom/Service Search Hold on any system/search.
Enter the system/search number tag, press .no, and press Menu.
Press HOLD to resume.
Note: Selecting just a system will hold on the rst frequency in the system (not
ID). If two systems/searches have the same number tag, they will be selected
in sequence (the rst time you select the number tag, the scanner will go to
the rst system/search assigned to that number tag; if you select the same
number tag again, it will go to the 2nd system/search assigned to that number
tag, and so on). The same rule applies to channel number tags (so don’t start
at 1 for each channel group in the system).
P25 ADJUSTMENT MODE
You may be able to optimize the scanner’s performance with digital APCO 25
frequencies.
These steps work only when you can clearly receive the frequencies. If you are in a
weak-signal area or receive interference, these steps will not work. These steps do
not compensate for weak signals or signals subject to interference.
If you set an incorrect decode threshold level, the scanner might stop decoding
digital signals. If this happens, change the P25 Threshold Mode to Auto then repeat
these steps.
Set the P25 Threshold Mode to Manual in Site Options for the Site, System Options
for any conventional channel in the System, Srch/CloCall Opt, or Edit Custom
Search.
Hold on any Site, or digital conventional Frequency.
Press Vol then Func then Vol.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info