647706
54
Zoom out
Zoom in
Previous page
1/132
Next page
54
Set Modulation
This setting selects the modulation used for the site. The default setting is auto (NFM
for FM frequencies). See also Band Defaults.
1. Scroll to ‘Set Modulation’ and press E/yes.
2. Scroll to Auto, NFM, or FM and press E/yes.
Note: You can also toggle modulation for a site in hold mode by pressing Func
then 9(mod).
Set Attenuator
This setting controls whether the scanner attenuates signals on this site by about 20
dB. The default setting is off.
1. Scroll to ‘Set Attenuator’ and press E/yes.
2. Scroll to On or Off and press E/yes to save and exit.
Note: You can also toggle attenuation for a site in hold mode by pressing Func
then 7(att).
Set Lockout
Determines whether a site will be scanned or not (even if the quick key for the site
is turned on). ‘Temporary L/O’ locks out the site until you cycle power. The default
setting is unlocked.
1. Scroll to ‘Set Lockout’ and press E/yes.
2. Scroll to ‘Unlocked’, ‘Temporary L/O’, or ‘Lockout’ and press E/yes to save
and exit.
Note: You can also toggle lockout by holding the site and quickly pressing
Func then L/O.
Set Hold Time
Sets (in seconds) the amount of time the scanner will scan the system before
moving on to the next system. All (unlocked) channels will be scanned at least once
regardless of this setting. The scanner moves to the next system after the hold time
expires, any current transmission ends, and the channel delay time expires. The
default setting is 0 seconds for each system.
1. Scroll to ‘Set Hold Time’ and press E/yes.
2. Enter the hold time (0-255 seconds) you desire and press E/yes to save and
exit.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info