647706

Uniden BCD325P2 Manual

44
Zoom out
Zoom in
Previous page
1/132
Next page
44
Set Hold Time (in seconds)
Sets (in seconds) the amount of time the scanner will scan the system before
moving on to the next system. All (unlocked) channels will be scanned at least once
regardless of this setting. The scanner moves to the next system after the hold time
expires, any current transmission ends, and the channel delay time expires. The
default setting is 0 seconds for each system.
1. Scroll to ‘Set Hold Time’ and press E/yes.
2. Enter the hold time (0-255 seconds) you desire and press E/yes to save and
exit.
Set Delay Time
Sets the delay (in seconds) the amount of time the scanner stays on a channel after
the transmission has ended before moving to the next channel. A negative delay will
force a resume after that number of seconds. This setting applies to all channels in
the system. You cannot set the delay on a ‘per channel’ basis. The default setting is
2 seconds.
1. Scroll to ‘Set Delay Time’ and press E/yes.
2. Scroll to the desired delay time (-10, -5, -2, 0, 1, 2, 5, 10, or 30 secs.) and
press E/yes to save and exit.
Set Audio AGC
Allows you to turn the AGC feature on or off for the system. See also Adjust Audio
AGC.
1. Scroll to ‘Set Audio AGC’ and press E/yes.
2. Scroll to ‘Analog’ and press E/yes to toggle on or off.
3. Scroll to ‘Digital’ and press E/yes to toggle on or off.
4. Press Menu to return.
P25 Waiting Time
This setting gives the scanner time to determine if a transmission is digital or
analog. During this time, the scanner evaluates the signal and, if it detects P25,
it immediately opens squelch. If P25 is not detected before the delay expires,
the scanner opens squelch at the end of this delay. This prevents “false decode”
problems (digital noise at the beginning of transmissions). The default setting is 400
ms. This setting only effects conventional channels with an Audio Type set to ‘All’.
1. Scroll to ‘P25 Wait Time’ and press E/yes.
2. Set the Wait Time from 0 to 1000 ms and press E/yes.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info