647706
38
Zoom out
Zoom in
Previous page
1/132
Next page
38
Set GPS Format
Allows you to set the GPS format to DD,MM,SS or decimal degrees (DD.000000),
time format, time zone, and units.
1. Scroll to ‘Set GPS Format’ and press E/yes.
2. Scroll to ‘Pos Format’ and press E/yes.
3. Scroll to ‘DMS:DDD MM”SS.ss’ or ‘DEG:DDD.dddddd’ and press E/yes to
save and exit.
4. Scroll to ‘Set Time Format’ and press E/yes.
5. Scroll to ‘12H’ or ‘24H’ and press E/yes to save and exit.
6. Scroll to ‘Set Time Zone’ and press E/yes.
7. Scroll to ‘Your Time Zone’ and press E/yes to save and exit.
8. Scroll to ‘Set Unit’ and press E/yes.
9. Scroll to ‘mile’ or ‘km’ and press E/yes to save and exit.
10. Press Menu to return.
Set GPS Baud Rate
Allows you to set the baud rate for the serial port. You set the port to match the
speed used to communicate to 4800 bps for communicating with BC-GPSK and
BC-UTGC.
1. Scroll to ‘Set GPS Baud Rate’ and press E/yes.
2. Scroll to Off, 4800, 9600, 19200, 38400, 57600, or 115200 and press E/yes
to save and exit.
Band Defaults
Basically, this setting allows you change the ‘Auto’ values you can select while
programming frequencies, searches, etc. to whatever you feel ‘Auto’ should be for
each band (vs. the radio defaults). Since all of the step and modulation settings
default to ‘Auto’, this allows you to skip those settings when programming.
Note: these setting have no effect on service searches.
1. Scroll to the band you wish to edit and press E/yes.
2. At ‘Set Modulation’ scroll to AM, NFM, FM, WFM, or FMB (Broadcast) and
press E/yes to save and exit.
3. At ‘Set Step’ scroll to Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100
kHz and press E/yes to save and exit.
4. Scroll to any other bands you wish to edit and repeat.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info