647706
14
Zoom out
Zoom in
Previous page
1/132
Next page
14
Quick Search - lets you search from the currently-tuned frequency or channel or
enter a frequency and start searching.
Automatic Channel Setup - accepts frequencies on any valid channel step, even if
it does not fall within the band plan’s default steps.
Congurable Band Defaults - allows you to set the step (5, 6.25, 7.5, 8.33, 10,
12.5,15, 20, 25, 50 or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for
31 different bands.
Attenuator - you can set the scanner’s attenuator to reduce the input strength of
strong signals by about 20 dB per channel, search band, close call band, or trunked
system.
Duplicate Frequency Alert - alerts you if you try to enter a duplicate name or
frequency already stored in the scanner.
Search Lockouts - you can lock out up to 500 frequencies (250 temporary, 250
permanent) in search or close call search.
Built-in Battery Charger - allows you to charge the batteries in the scanner with a
timer to set up to 14 hours.
UNDERSTANDING DYNAMIC MEMORY
CONVENTIONAL SIMPLEX AND REPEATER SYSTEMS
Simplex systems use a single frequency for both transmit and receive. Most radios
using this type of operation are limited to line-of-sight operation. This type of radio is
frequently used at construction job sites, and with inexpensive consumer radios such
as GMRS/FRS radios. The range is typically 1-8 miles, depending upon the terrain
and many other factors.
Repeater systems use two frequencies: one transmits from the radio to a central
repeater; the other transmits from the repeater to other radios in the system. With a
repeater based system, the repeater is located on top of a tall building or on a radio
tower that provides great visibility to the area of operation. When a user transmits (on
an input frequency), the signal is picked up by the repeater and retransmitted (on an
output frequency). The user’s radios always listen for activity on the output frequency
and transmit on the input frequency. Since the repeater is located very high, there is
a very large line of sight. Typical repeater systems provide coverage out to about a
25-mile radius from the repeater location.
UNDERSTANDING CTCSS/DCS/NAC
Continuous Tone Coded Squelch System (CTCSS) and Digital Coded Squelch
(DCS) are two methods used to prevent interference by other radio communications.
Your scanner can receive transmissions that use these codes (or more commonly
referred to as tone codes).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BCD325P2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BCD325P2 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info