647979
81
Zoom out
Zoom in
Previous page
1/100
Next page
More user manuals on ManualsBase.com
77
Reverse Mode
This key will allow you to observe the reverse frequency of the repeater. While pressing
RVRS, the standard pair frequency will be displayed. For a list of the standard pair
frequencies, refer to the table "Reverse List" in the Appendix. If the frequency that you have
chosen does not have an offset frequency, the display will indicate ERROR and NO
REVERSE. This feature does not work in the Weather Search mode.
Channel Step Selection
You can set channel steps, 5 kHz - 100 kHz or Auto, in Conventional mode or Chain search
mode. The default receive mode should be the proper mode setting in almost all cases. You
may wish to set some VHF channels for NFM mode, depending on any adjacent channel
interference problems. WFM is typically only used for broadcast frequencies, such as TV
audio or FM radio.
See STEPS in "Menu Description" for details.
Mute On/Off
To manually turn ON the Mute function, press and hold MUTE until MUTE ON is displayed.
You will not hear any audio. This feature does not function in the WX Alert mode, because
the audio is already muted. To turn it OFF, press and hold MUTE again.
Receiving Mode Selection
You can also set the receiving mode, AM or FM etc., in Conventional mode or Chain Search
mode.
See MODE in "Menu Description" for details.
Frequency and Channel Tuning with the VFO Control
The VFO knob can be used for stepping frequencies or through memory channels (for
Conventional channels or Talkgroup ID Scan Lists).
To switch the setting for the VFO control, press the VFO. This will change modes from
Channel to Frequency or Frequency to Channel.
1. In Conventional mode, when the setting for the VFO is channel, rotate the VFO to move
up (to step up through channels) or down (to step down through channels). If you are in
Trunk Manual mode, you will step through Scan List memory locations.
2. In Chain Search mode, when the setting for the VFO is frequency, rotate the VFO to move up
to step up through frequencies sequentially or to down to step down through frequencies. To
change the step, you will need to go into the Chain Search menu and adjust the step for the
desired memory location.
Remember! When you set Additional Features through the menu screen, you can also
use or instead of rotating the VFO.
Also instead of pressing E, you can press the VFO control.
BC785D 11/8/2 1:01 PM Page 77
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC785D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC785D in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info