647705
14
Zoom out
Zoom in
Previous page
1/40
Next page
14
Introduction
1 Volume Control — Lets you raise or lower the level of the sound.
2 Squelch Control — Lets you set the signal level required to receive a
transmission. If you open the squelch all the way, you will hear hissing
between transmissions. This lets you hear weak signals, but prevents
scanning. As you close squelch, a stronger signal is required to stop
scanning and open audio. You normally set the control to a point just
where hissing on all channels stops between transmissions.
3 SCAN — Press to begin scanning the channels or to resume
scanning.
4 ALARM Select — Set to Off to disable alarm; Set to Radio to enable
the radio alarm; Set to Tone to enable the tone alarm.
5 SNOOZE/Backlight Key
Backlight: Tap to turn the LCD backlight on for 15 seconds. Press and
hold to permanently turn on the backlight. Press and hold again to turn
off the backlight.
Snooze: Press while the alarm sounds to silence the alarm for
5 minutes.
6 TIME Set — Use to select your desired operation: Alarm Set; Clock
Set; Clock.
7 HOLD — Press to temporarily stop scanning, limit searching, or
weather scanning and remain on the channel. The scanner displays
the channel on hold. Press again to resume searching or scanning.
8 E/PGM — Press to enter the Program Mode. In Program Mode, enter
the desired frequency using the number buttons. Then press E/PGM
to store that frequency into the memory.
In Limit Search Mode, after entering the frequency, press E/PGM to
program the upper and lower limit frequency.
9 0 to 9 — Use the number buttons in four basic operations:
press a number button to enter a frequency.
press a number button to change a channel using the Direct
Channel Access feature.
press a number button while scanning to enable or disable the
associated scanning bank memory bands.
10 POWER — Press to turn power on and off. The time and date display
when power is off (standby mode).
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC370CRS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC370CRS in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info