If your BC350C is not performing properly, try the steps listed
below.
Scanner won’t work
• Check the connections at both ends of
the AC Adapter.
• Turn on the wall switch of your room.
You could be using an outlet controlled
by the wall switch. Move the AC
Adapter to another wall outlet.
• Check the connections at both ends of
the DC cord or cigarette lighter cord.
• Check to see if the fuse is blown.
• Make sure the ignition key in your
vehicle is at the Accessory position.
• Make sure the power switch is turned
on.
• Check the antenna and its connection.
• Move the scanner.
• You may be in a fringe area. This may
require an optional multi-band antenna.
Check with your dealer or local
electronics store.
• Adjust the Squelch Control.
• Check the Antenna Connection.
• Review each channel's frequency to
see if it is still stored in memory and is
correct.
• Check and adjust Squelch (see
"Adjusting the Squelch" on page 18).
• Check the antenna connection.
• Check to see if all channels are locked
out.
• It is possible that none of the
programmed frequencies are active at
the time. Try the band search.
30
Troubleshooting
PROBLEM PROBLEM
Improper reception
Weather scan won't
work
Scan won’t stop
