647672
18
Zoom out
Zoom in
Previous page
1/28
Next page
Channel Lock Out
You can lock out a channel so it is not scanned. This does not
erase the frequency from the channel when it is locked out.
You can lock out all the channels in a bank, if desired. However, if
you do, pressing that bank key will emit an error tone and the scan-
ner will not scan.
In the POLICE bank, MRN bank, or FIRE/EMG bank, you can lock
out all the factory pre-programmed channels (those frequencies
that display without channel numbers in Scan Mode). This en-
ables you to make a secondary private bank, if desired.
You cannot lock out any frequency in the WX or AIR banks. These
banks are frequency search banks, and you cannot lock out any
frequency in Search Mode.
[L/O]
is active only when squelch is opened (scan is stopped) or in
Hold Mode.
Locking Out an Unwanted Channel
In Scan Mode, press
[L/O]
when the scanner stops on a channel you do
not want to hear. The scanner locks out that channel and immediately ad-
vances to the next channel to resume scanning.
In Scan/Hold Mode, press
[L/O]
to lock out the displayed channel/fre-
quency. In this case pressing
[L/O]
will not advance to the next channel.
"L/O" will appear on the screen to indicate that the displayed channel is
locked out.
Searching for Locked Out Channels
In Scan Mode, you will not see locked out channels. However, to search
for locked out channels and display them on the screen, use
[UP]
and
[DOWN]
. These keys will enable you to search manually through the
bank in Hold Mode only. "L/O" will appear on the screen to indicate the
locked out channel.
Restoring a Locked Out Channel
Suppose you want to unlock Channel 12 of the PRIVATE bank. Press
[PRIVATE]
to start scanning. Press
[HOLD]
to stop scanning. ("HOLD"
& "SCAN" must appear on the screen.) Use
[UP]
or
[DOWN]
to find
locked out Channel 12 (which shows "L/O"). Then press
[L/O]
. "L/O" dis-
appears to indicate that Channel 12 is now unlocked and restored for
scanning.
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC350A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC350A in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info