647672
9
Zoom out
Zoom in
Previous page
1/28
Next page
[L/O] KEY Press [L/O] to "lock out" or prevent scanning of
the displayed frequency. [L/O] is active only dur-
ing opened squelch or in the Hold Mode.
Locked out channel can be displayed on the
screen by using the [UP] or [DOWN] key to
manually scan through the selected bank in Hold
Mode only. "L/O" appears on the display to indi-
cate that the channel is locked out. Note: Lock-
ing out a channel will not erase the programmed
frequency.
[BAND] KEY This key is active in Search Mode only (when
"SRCH" is displayed on the screen). When you
press [BAND], the upper and lower limits of the
band you are searching are displayed for 3 sec-
onds. Then the display returns to the current fre-
quency. Press [BAND] again within 3 seconds
to step up one higher band. Press this key as
many as it takes to find the band you want to be
searched.
Important: This key has a very important secon-
dary function. In Program Mode, you can press
[BAND] to leave this mode.
[PROG] KEY This key initiates and completes programming.
It is active whenever a steady frequency appears
on the display. Press [PROG] to start Program-
ming Mode. "CH" appears and blinks, indicating
you are in Programming Mode, and urges you to
select the channel of the bank to be pro-
grammed. Press a programmable bank key
([PRIVATE], [FIRE/EMG] or [POLICE]) to be
programmed. Note: Never press non-program-
mable bank keys ([WX], [AIR] or [MRN]). If you
press one of these keys, "Error" will be dis-
played, and you may lose the frequency you
wanted to program.
VOLUME Control/
Power Switch
This control turns the scanner on or off, and also
adjusts the volume.
SQ (Squelch) Control Adjust [SQ] to set the scan threshold. When you
are monitoring a single channel in Manual Mode,
adjust [SQ] to eliminate the background rushing
noise heard in the absence of an incoming signal.
LCD Display The liquid crystal display (LCD) shows the cur-
rent channel or its frequency. It also displays the
mode indicators, status indicators, and bank indi-
cators. (See the Screens section for more infor-
mation.)
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC350A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC350A in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info