647682
65
Zoom out
Zoom in
Previous page
1/88
Next page
More user manuals on ManualsBase.com
59
Programming Talkgroups
For many of the trunk scanning features to operate, you need
to program the scanner with the talkgroup ID’s. Each bank
can store up to 100 talkgroups in 10 ID groups of 10
talkgroups each. Group similar talkgroups together in the
same ID group. When scanning, you can turn ID groups on
and off with a quick keypress.
Storing Known Talkgroups
Follow these steps to store talkgroups you have gotten from a
list.
2:SCAN OPTION 2:TRUNK Select the bank
3:TALK GROUP
1. Use the scroll bar to select the talkgroup to program, then
press E.
2. Select 1:ID and press E.
3. For Type 2/Digital systems, enter the up to 5-digit
talkgroup ID, then press E.
For Type I systems, enter the 3-digit fleet, for the
dash, then the subfleet number.
For EDACS systems, enter the two-digit agency, for
the dash, then the fleet and subfleet number.
For LTR systems, enter the area code, , home
repeater number, , ID number, then E.
Note: If you replace an existing ID, the alpha tag is also
deleted.
4. Select 2:ALPHA TAG and press E.
5. Enter the alpha tag for the talkgroup.
Note: The alpha tag defaults to the numeric talkgroup ID.
6. If you want the scanner to beep three times to alert you
when the talkgroup is active, select 3:BEEP ALERT and
press E; then, select 1:ON.
7. Press MENU/BACK.
Repeat this procedure for each talkgroup in the system.
Storing Found Talkgroups
While you are ID Searching (see “Searching for Active
Talkgroups”), you can quickly store an active talkgroup ID into
an ID memory.
.
.
.
.
BC296D(NEW) 10/16/03 6:35 PM Page 59
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC296D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC296D in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info