647647
65
Zoom out
Zoom in
Previous page
1/110
Next page
61
Moving between Scan List Memories
There are a number of ways to step and move through your
Scan List memories:
1. Press HOLD/MAN in the ID Scan mode and rotate the
VFO to move to up or down.
2. Or, press HOLD/MAN in the ID Scan mode, next press
0-9 (scan list number), then press 0-9 (memory position).
For example to move to Scan List 4, memory position 10,
press: HOLD/MAN, 4, 0, HOLD/MAN
Set Activity ID to ON, when your scanner finds an active ID
during a transmission the active ID appears every 0.5
seconds.
I-Call (Motorola/EDACS)
I-Calls are direct unit-to-unit transmissions that are not heard
by other system users. Your BC250D can receive these
transmissions. How you receive I-Calls depends on whether
you are in Search or Scan mode.
During I-Call reception the display will show the Unit ID
number of either the transmitting or receiving mobile unit, not
a talkgroup. Unit IDs will display differently according to the
type of trunked system, and will replace the n's shown here.
EDACS and MOTOROLA TYPE 1 innnnn
MOTOROLA TYPE 2 7nnnnn
Hint -- There are thousands of Unit IDs in typical systems,
but relatively few I-Calls at a given moment, so it is
normally best to let the scanner receive any I-Calls
without trying to specify particular units.
I-CALLS IN SEARCH MODE
In Search mode, the scanner default is that I-Call reception is
OFF. This means that I-Calls will not be received until you
program them to be ON. You have three choices for
controlling I-Call reception. Through the Menu system, go to
2:SCAN OPTION / 2:TRUNK - select bank number -/
8:I-CALL, and make your selection.
The menu choices are:
I-CALLs TALKGROUPS
1
OFF Not received Received normally This is the BC250D default
2
ON YES Received normally Use this choice to receive I-Calls
together with normal
talkgroup traffic.
3 ONLY YES NOT RECEIVED Use this setting to listen to I-Calls,
and block all talkgroup reception.
For quick access to this mode,
press (decimal) then RSM.
.
BC250D 11/6/2 11:37 AM Page 61
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC250D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC250D in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info