647647
44
Zoom out
Zoom in
Previous page
1/110
Next page
6. Press SEARCH to start auto storing.
7. After the search has gone through the
search range, press HOLD/MAN to
stop this feature. STORE END
appears on the display. You may want
to let it run through the search range
several times because during the first
pass there may not have been any
transmissions at that particular time on
that frequency.
Squelch (SQ) Mode
The scanner can be set to the following SQ modes.
Carrier SQ mode (default setting)
The scanner will stop on any transmission or squelch
opening, regardless of whether any subaudible tone has
been programmed for the channel or search range.
Tone SQ mode
The scanner will stop on any active frequency for which
either no subaudible tone has been programmed or for
which the user-programmed subaudible tone is also active.
Tone Search mode
During any transmission, the scanner will begin searching
all possible subaudible tones, one of which may also be in
use. The scanner counts up through the CTCSS tones and
instantly determines any possible DCS tone. See page 101
for a listing of the tones that the BC250D decodes.
Note: When Tone Search is active in Scan mode, once the
CTCSS or DCS display flashes a tone repeatedly
(meaning that it has found the tone match), you can
press E to program that frequency with the captured
tone. When you change the mode to Tone SQ from
Tone Search that frequency and tone will be
programmed.
Tone Lock (out) mode
For either a Memory channel or a Search Range, you can
lock a particular subaudible tone by pressing L/O after
scrolling to the desired tone. The scanner will stop on any
transmission except those which may be using the locked
subaudible tone.
To set your scanner, enter into the Menu mode.
1. Press MENU/BACK.
2. Select 3:SYSTEM OPTION / 8:SQ MODE by
rotating the VFO and pressing E.
40
C 001
1245.8500 NFM
Bank 12--56----
AUTO STORE
BC250D 11/6/2 11:36 AM Page 40
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC250D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC250D in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info