647647
41
Zoom out
Zoom in
Previous page
1/110
Next page
Caution: After you have entered the search range while still
in the Menu mode, you can set your alpha tag (see
page 28), change the step size of the search,
change the mode or change the trunk set.
Once the lower and upper parameters of your
search are edited, the Menu screen backs up one
level to allow you to modify the step size, receive
mode, and alpha tag. Select 2:STEPS for your
step size choices and then press E.
Select 3:MODE for the receiver mode choices and
then press E. Select 4:ALPHA TAG to enter an
alpha tag using the VFO and then pressing E.
Select 5:TRUNK to switch ON or OFF for trunk
search.
Starting Chain Search
1. After setting the search ranges, select 2:SERVICE
OPTION / :CHAIN SEARCH / 1:CHAIN SEARCH
by rotating the VFO and pressing E.
2. Select 1:ON by rotating the VFO and pressing E.
3. Press SEARCH to search up to 10 ranges continuously.
Note: If CHAIN SEARCH is OFF, only 1 range can be
searched.
When searching stops, press RSM to resume
searching.
When you rotate the VFO while searching, you can
change the search direction to up or down.
When searching in WFM, it will stop before reaching
the desired frequency if the step is other than 50 kHz
or 100 kHz.
Search Hold Feature
1. Press HOLD/MAN at anytime to stop
the search.
2. Press RSM or SEARCH to resume
searching.
Data Skip
A scanner will normally stop on any transmission it receives.
This means the BC250D will occasionally stop on data signals
and unmodulated transmissions. You can automatically skip
many of these types of transmissions during search. To
activate the Data Skip feature, enter into the Menu mode.
37
SRCH 12.5k
1240.0000 NFM
Range 1
25cm Amateur Grp
BC250D 11/6/2 11:36 AM Page 37
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC250D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC250D in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info