647647
35
Zoom out
Zoom in
Previous page
1/110
Next page
Scanning
1. After programming frequencies,
simply press SCAN to begin scanning.
During scanning, when you rotate the
VFO, you can select the direction
( or ) you want to scan.
2. The bank indicators selected for scanning appear on the
display, and the bank being currently monitored flashes.
You can deselect banks from active scanning by entering
their number on your keypad. The indicator for each
deselected bank disappears, and the banks channels are
not scanned.
Note: One bank must always be active. You cannot
deactivate all ten banks at the same time. If you try to
deselect all the banks, the first bank is automatically
selected.
To restore a bank to active scanning, enter the banks
number on your keypad.
The banks indicator will display again.
3. During normal scanning the
scanner skips
unprogrammed or locked
out channels.
4. When a transmission is
received, the scanner stops
on that channel. When the
transmission ends, scanning
resumes automatically.
Another method is as follows:
1. Press HOLD/MAN.
2. While the VFO setting is in the channel mode, rotate the
VFO until the desired channel is displayed.
Note: When in Hold mode, you can use the VFO to step up
or down through the channels. You can also switch
from stepping up/down through channels to stepping
up/down through frequencies by pressing the
HOLD/MAN button for 2 seconds.
Storing Frequencies During Scanning
During Scanning
1. Press HOLD/MAN.
31
1345
9 10
26
7 8
CHANNELS
Frequency
not entered
Frequency
Locked Out
(L/O)
SCAN
C 001
SCAN
Bank 1234567890
BC250D 11/6/2 11:36 AM Page 31
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC250D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC250D in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info