647645
105
Zoom out
Zoom in
Previous page
1/128
Next page
105
Appendix
User Defined Fleet Maps
Type I Programming Information
When a Type I system is designed, the address
information for all the ID’s is divided into 8 equal sized
blocks, numbered 0–7. When you program your scanner
to track a Type I system, you must select a size code for
each of these blocks. When you have assigned a size
code to all 8 blocks, you’ll have defined the fleet map for
the system you are tracking. Each size code determines
the number of fleets, subfleets, and ID’s each block will
have. For example, a size code of S-4 has one fleet,
which is divided into 16 separate subfleets, and it has a
total of 512 individual ID’s.
When a block is assigned a size code, the fleet or fleets
created within the block are assigned a Type I ID.
The way these ID’s display on your scanner depend on
the block number and the block’s size code. When a Type
I ID appears, the leftmost digit represents the block which
contains the ID.
The next 2-3 digits identify which fleet is active, and the
last digit(s) identifies the subfleet.
The details concerning how the size codes are selected
by a Type I System designer are highly dependent on the
specific needs of the system’s users. Some organizations
might want many subfleets with only a few radios each,
while another organization might want only a few sub
-
fleets with many radios each. Your task is to program your
fleet map with the same size code assignments as the
trunked system. If you do this accurately, you’ll track all
the Fleet-Subfleet combinations used by the system. In
other words, you’ll hear complete communications while
monitoring a trunked system.
If you don’t already know the size codes used, you’ll have
to guess at them. But since you don’t have to figure out all
the blocks at once, this isn’t as hard as it seems. Select a
size code for a block, and then press Scan. Now listen to
the communications. If you decide you are receiving most
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC246T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC246T in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info