Manual Uniden 1380 (page 10 of 44) (English)

647661

Zoom out

Zoom in

1/44

Your speakerphone can also be mounted on a wall plate (not included).

Note: To prevent the handset from falling out of the cradle while the

phone is hanging on the wall, you must switch both the handset

hook and the desk stand to their wall-mount positions.

1. On the front of the base, pull the handset hook out of the slot. Rotate hook

180 degrees and ip it from front to back. Slide it

back into the slot.

2. Turn the base over. Press in on the tabs and

remove the desk stand from the back of the base.

3. Rotate the stand 180 degrees, and insert

the hooks marked WALL into the notches

marked WALL. Press in on the tabs and

snap the stand into place.

4. Connect the telephone line cord to the

wall jack and the phone. If desired, wrap

any excess cord around the cord hooks as

shown.

5. Place the mounting slots over the pins on

the wall plate, and slide

the base down to lock

it into place.

Important

Instructions

for Moving the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Uniden 1380 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Uniden 1380 Manual

Product: