652324
29
Zoom out
Zoom in
Previous page
1/56
Next page
29
Instructions for the installer
3.19 - ELECTRICAL CONNECTIONS
Regulations in force
The gas and water feeding pipes and the CH system pipes
cannot be used as ground plates.
Ensure that the above safety electrical requirements subsist;
incaseofdoubt,askforaprofessionallyqualiedtechnicianto
check the appliance’s electrical system.
UNICAL refuses responsibility for any damages arising from
failure to earth the boiler correctly.
Itisnecessarythataqualiedtechnicianveriesthattheelec-
trical system is adequate to the appliance’s maximum absorbed
Terminal block E8 (back)
Terminal block BCM (back)
power, indicated on the data plate, verifying in particular that
the section of the system’s cables is suitable to the appliance’s
maximum absorbed power.
For the appliance’s general electrical supply the use of adaptors,
multiple sockets and/or extension cords is strictly forbidden.
The use of any power supplied equipment implies the observan-
ce of several fundamental rules, such as:
- Do not touch the appliance with any wet part of your body
and/or barefooted;
- Do not pull the supply cables
- Do not permit children or inexpert people to use the
appliance.
Mains electrical supply connection 230V
The electric connections of the boiler are shown in the section
named“WIRINGDIAGRAMS”
A mains supply of 230 V – 50 Hz is required. The wiring to the
boiler must be in accordance with the current CEI regulations.
WARNING!
We remind you that upstream of the electrical connection, it
will be necessary to foresee a service relay (NOT SUPPLIED)
which, when the electrical safety devices (ISPESL) interve-
ne, shuts down the electrical supply to the on-off fuel valve
DANGER!
The electrical
connections must be
carried out only by a
qualied engineer.
Before carrying out the
connections or any other operation
on the electrical parts, always switch
off and disconnect the electricity
supply and ensure yourself that it
cannot be accidentally turned on.
tted on the gas supply cir-
cuit, but not to the boiler so
as to guarantee the running
of the pump and permit the
boiler to cool down.
WARNING!
We remind you that
upstream of the electri-
cal connection, it will be
necessary to foresee a
service relay (NOT SUP-
PLIED) which, when the electrical
safety devices (ISPESL) intervene,
shuts down the electrical supply to the
on-off fuel valve tted on the gas supp-
ly circuit, but not to the boiler so as to
guarantee the running of the pump and
permit the boiler to cool down.
Itisnecessarytotadoublepoleswitch
on the electrical supply line, having a 3
WARNING!
230 V cables shall be separated from 24 V ones,
using the two plastic conduits supplied within the
boiler casing L.H. side panel.
mm contact separation in both poles, in an easy
accessible position in order to make quick and safe
the servicing operations.
FL = FLOW CONNECTION
A
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unical MODULEX EXT 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unical MODULEX EXT 250 in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Unical MODULEX EXT 250

Unical MODULEX EXT 250 Installation Guide - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info