*To adjust the pump of the solar energy panels: Set the parameter 29 at the switching off temperature (e.g. 90°C). The hysteresis (parameter 30) can be set, in this
case, between 7 and 25°C; the standard value is 7 °C.
21
22
23
24
25
26
27
28
29
30
31
32
33
34
20Introduction of the numeric code
Numeric code
Bus code for heating circuit 1 (HK1)
Bus code for heating circuit 2 (HK2)
Anti frost temperature
Max. flow temperature for heating circuit 1
Max. flow temperature for heating circuit 2
Heating curves distance
Time relay function
Relay activation temperature (see 28)
Hysteresis for supplementary relay (see 28)
Loading pump stop
Pumps in parallel operation
Anti legionella program
Zone outer compensators communication address
(if in the 0, 1 or 3 setting position no sensor is
connected, the relay is activated with the temporised
program for the circulating pump)
0000-9999
0000-9999
0-15
0-15
(-5)°C - (+5)°C
50°C - 110°C
50°C - 110°C
5 - 50 °C
0-3
0: Increase of the return
water temperature
1: Solid fuel fired boiler
2: Manifold pump
3: Solar panel
10°C - 90°C
2 °C - 20 °C*
0/1Off/On)
0/1 (Off/On)
0/1 (Off/On)
0/1 (Off/On)
Parameter
-----
-----
1
-3
80
45
5
0
5
1
0
1
1
-----
10
FACTORY SET PARAMETERS
(protected by a secret code)
51Boiler maximum temperature50°C - 110°C
52Boiler minimum temperature10°C - 60°C
53Temperature increase for D.H.W.0°C - 50°C
54Simplified start10°C - 50°C
55Activation of minimum temperature limit0/1 (Off/On)
56Boiler temperature hysteresis (dynamic)5 - 20 °C
57Boiler time hysteresis (dynamic)1 - 30 min
58Stop time for 2
nd
burner0 - 30 min
59Fixed hysteresis for 2
nd
boiler2 - 20 °C
60Hours to the next boiler sequence change0 - 250 hours
80
60
20
50
1
5
10
10
2
0
61Number of starts burner 1
62Operation time burner 1
63Number of starts burner 2
64Operation time burner 2
Mixing valve parameters
71Operation time of mixing valve 1 (see motor data plate 1)
72Operation time of mixing valve 2 (see motor data plate 2)
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Unical Ellprex at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Unical Ellprex in the language / languages: English as an attachment in your email.
The manual is 0,75 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
