805636
8
Zoom out
Zoom in
Previous page
1/42
Next page
EN-6
Temperature dial
Turn the temperature dial (D) to the set ironing temperature, corresponding with the garment to be ironed.
TEMPERATURE DIAL
I Nylon-silk 70° C < 120° C
II Wool 100° C < 160° C
III Cotton 140° C < 210° C
IV Linen 170° C <225° C
Temperature indicator
When the device is heating up, the temperature indicator
(B) lights up.
Once the device has reached the temperature set by the
temperature dial (D),
the indicator will no longer light up.
During use, the temperature indicator (B) will light up again, indicating it is heating in order to maintain
the set desired temperature.
• The device heats up quicker than it cools down. Therefore, start with ironing articles that require a lower
temperature.
• If the article consists of various fabrics, you must always select the lowest required ironing temperature.
• Synthetic fibers and silk fabrics should be ironed on the inside to prevent them from getting a sheen.
• Velvet and other textures that rapidly become shiny should be ironed in one direction while applying
light pressure. Keep the iron moving at all times.
• Pure wool fabrics (100% wool) may be ironed with the steam iron. Use a dry cloth as a mat and then
select the corresponding fabric setting for ironing.
• Never iron over zippers or rivets in the cloth. This will damage the soleplate. Iron around any such object.
• When ironing woolen fabrics, the fabric could get a sheen. We suggest turning the article inside out and
ironing the reverse side.
Steam trigger
When the device is heated to the set temperature and the temperature indicator (B) no longer lights up,
hold the steam trigger (C) to emit steam from the soleplate (A) while ironing.
When the steam trigger (C) is released, the device can be used for (dry) ironing without steam.
During use, the temperature indicator (B) will light up again, indicating it is heating in order to maintain
the set desired temperature.
Cord clip
When the device is not in use, the power cord and steam supply hose can be stored in the cord clips (4)
Correct placement of the iron on the thermal isolation stand
When the device is placed on the thermal isolation (5), it must be placed correctly to prevent it from
falling from the base.
I
II
III
IV
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Umuzi Cleaning UZ-CL-STIS01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Umuzi Cleaning UZ-CL-STIS01 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info