485075
11
Zoom out
Zoom in
Previous page
1/48
Next page
9
Getting Started - Initial Set Up
Satety WarningsIntroducing the LCD TVInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
TUNING IN
1) Using the RF Cable supplied, connect the TV to the TV Aerial socket (Fig A)
IMPORTANT: If your TV signal is inadequate to receive a good Digital signal, you will need to connect
a 'Signal booster' be tween your TV and TV Aerial Socket. See section 5.
It is highly unlikely you will receive any/all of the digital channels using an indoor/portable TV aerial.
You should use a Digital/Hi Gain outdoor aerial for optimum sinal reception
2) Connect the Power cable to your electrical outlet and the Television (Fig B above)
3) Switch on the television using the power switch located next to the DVD player
4) Insert the batteries supplied into the Remote control and press the Power/Standby button to power on the TV
You will now be welcomed with the initial set-up screen. Follow the on screen instructions:
5) A) Select country - default is UK
B) Select language - default is English
C) Ensure TV aerial is connected and press OK on the remote control to Tune in the Television
5) If the TV finds some but not all, of the Digital channels the TV is functioning correctly but the signal being
received is not strong enough. (The signal strength needs to be above 85% - you can see the signal strength the
TV is receiving when you change channels/ programmes) you will need to increase the signal strength in order to
recieve all of the channels available. The most economical way to do this is by purchasing and connecting a 'signal
booster' in between the TV and the TV aerial socket. If this does not solve the problem, you will need to upgrade
the TV aerial to a digital hi-gain compatible aerial
Once you have connected a 'Signal booster' you will need to retune the TV in order to receive all of the channels.
RE-TUNING TV / DIGITAL SWITCHOVER
In order to ensure you have the latest channels available tuned into your TV, it is necessary to perform
a scan/re-tune every couple of months. You will also need to do this when your region switches over to Digital.
You will be notified by Digital UK when your region switches.
1) Press [LCD-MENU] then 8-8-8-8. The first time installation menu will appear
2) Press [OK] on the remote control whilst 'OK' is highlighted on screen
Tuning will now take place and any new channels will be added automatically in the correct places as
broadcasted.
If the TV finds some, but not all, of the Digital channels, the TV is functioning correctly but the signal
being received is not strong enough. (The signal strength needs to be above 85% - you can see the signal
strength the TV is receiving when you change channels/ programmes) you will need to increase the signal
reception in order to recieve all of the channels available. The most economical way to do this is by
purchasing and connecting a 'signal booster' in between the TV and the TV aerial socket. If this does not
solve the problem, you will need to upgrade the TV aerial to a digital hi-gain compatible aerial.
IMPORTANT - AFTER TUNING DO NOT PRESS ANY BUTTONS FOR 20 SECONDS SO THE
CHANNEL INFORMATION CAN BE STORED.
Fig A
Fig B
Signal Booster
Connect between TV and TV
Aerial socket
19_36 22_36 english manual page Page 1 7. 1. 2009 10:24:33
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Umc LCD19-218 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Umc LCD19-218 in the language / languages: English as an attachment in your email.

The manual is 5,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info