576681
10
Zoom out
Zoom in
Previous page
1/76
Next page
7
UOP 12 A1
GB
IE
Handling and operation
In this chapter you receive important information for the handling and operation
of the device.
Preparing the oil suction pump
Remove the protective caps from the hose connections
5
+
6
.
Roll out the suction hose (Ø 6 mm)
7
and the discharge hose (Ø 12 mm)
8
and bend them straight.
Press the suction hose (Ø 6 mm)
7
onto the connection for the suction
hose
6
.
Press the discharge hose (Ø 12 mm)
8
onto the connection for the
discharge hose
5
.
Thereby, bear in mind the direction of fl ow (
Pump direction
) given
on the type plate of the oil suction pump .
Secure both hoses with the supplied hose clamps
9
.
TAKE NOTE
Ensure that the hoses are not kinked or bent, otherwise the hoses and the
pump could be damaged.
Pumping oil out
Before starting to pump oil out, let your vehicle engine warm-up for 5 - 10
minutes (oil temperature 40°C - 60°C). This reduces the viscosity of the oil
and it can then be pumped out more effi ciently.
Switch the vehicle motor off .
Roll out the suction hose (Ø 6 mm)
7
and the discharge hose (Ø 12 mm)
8
.
Insert the suction hose (Ø 6 mm)
7
into the dipstick opening of your vehicle.
Insert it carefully down to the lowest point of the oil sump.
Use a suitable container to collect the old oil and insert the discharge hose
(Ø 12 mm)
8
into the container.
Ensure that the on/off switch
2
is in the position 0 (off ).
First, connect the red positive-pole connection terminal (red)
3
to the
positive-pole (+) of the car battery.
Then connect the black negative-pole connection terminal (black)
4
to the
negative-pole (-) of the car battery.
Place the on/off switch
2
at position I (On) to switch the oil suction pump on.
Pump the oil out of the engine/the oil sump.
IB_102790_UOP12A1_LB3.indb 7IB_102790_UOP12A1_LB3.indb 7 25.08.14 11:2525.08.14 11:25
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ultimate speed UOP 12 A1 - IAN 102790 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed UOP 12 A1 - IAN 102790 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info