Manual Ultimate speed UMK 10 C2 - IAN 298835 (page 9 of 43) (English, German, Dutch, Danish, French)

763016

Zoom out

Zoom in

1/43

9 GB/IE/NI

Initial use

Place the product on a level, non-ﬂammable

surface. Do not cover the vents. Do not operate

the device in dusty environments. Doing so poses

a ﬁre hazard and could damage the device.

For inﬂatables with counterpressure (e.g. partly

ﬁlled car tyre): Switch on the product before

connecting the connection valve 7 to the tyre.

Note: Depending on the inﬂatable you can

use the connection valve 7 directly or along

with the included valve adapter 10 (see Fig. A).

Connecting to the cigarette lighter socket:

Note: Verify the socket of the cigarette lighter in

your vehicle has an adequately sized fuse.

Verify the product is switched oﬀ: on / oﬀ

switch 6 to position “0“.

Plug the cigarette lighter plug 5 into the socket

of the 12 V cigarette lighter.

Connecting the connection valve 7:

Open the connection valve 7: clamping

lever 8 vertical (see Fig. B).

Connecting without valve adapter 10 :

- Insert the open connection valve 7 into the

valve of the inﬂatable (if necessary, ﬁrst remove

valve cover of the inﬂatable).

- Hold the connection valve and close: push

tensioning lever

toward connection valve

Connecting with valve adapter 10 :

- Push the respective valve adapter into the

opening in the connection valve 7.

- Secure the valve adapter into the connection

valve 7: push clamping lever 8 toward

connection valve (see Fig. C).

- Insert the valve adapter 10 into the valve on

the inﬂatable (if necessary, ﬁrst remove valve

cover of the inﬂatable).

Switching on / off:

Switch the device on: on / oﬀ switch 6 to

position “I“.

Once the desired ﬁlling pressure has been

reached, switch the device oﬀ: on / oﬀ

switch 6 to position “0“.

Remove the cigarette lighter plug 5.

Removing the connetion valve:

Connecting without valve adapter 10 : Open

the clamping lever 8 for the connection

valve 7 and remove from the valve of the

inﬂatable.

Connecting with valve adapter 10 : Remove the

valve adapter from the valve of the inﬂatable.

Open the clamping lever 8 of the connection

valve 7 and remove the valve adapter 10 .

Note: Air may escape from the valve of the inﬂat-

able when removing the connection valve 7. Be

sure not to remove the connection valve 7 too

quickly.

The manometer 2 is not calibrated. Therefore

seek a specialist facility with a calibrated de-

vice after inﬂating inﬂatables where incorrect

pressure can be dangerous (e.g. car tyre).

Operation

Working instructions

This product is not suitable for continuous operation.

It was developed to produce air pressure, not air

volume.

Do not use the product for longer than 5 minutes

without interruption to prevent overheating and

damage to the device. Afterwards allow to

cool for a minimum of 20 minutes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed UMK 10 C2 - IAN 298835 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ultimate speed UMK 10 C2 - IAN 298835

Ultimate speed UMK 10 C2 - IAN 298835 User Manual - German, French, Italian - 29 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ultimate speed UMK 10 C2 - IAN 298835 Manual

Product: