Manual Ultimate speed UMK 10 B2 - IAN 275703 Mini Compressor (page 8 of 45) (English, German, Dutch, Danish, French)

647783

8

Zoom out

Zoom in

Previous page

1/45

Next page

8 GB/IE

Start-up / Operation / Cleaning / Storage / Warranty and service informationGeneral Safety Information / Start-up

- for cleaning or maintenance;

- if the power cable is damaged;

- if foreign objects enter the device or you notice

unusual noise.

Only use accessories supplied and recom-

mended by the manufacturer.

Do not attempt to repair the device yourself.

CAUTION:

How to avoid accidents and

injuries from electric shock:

Electrical safety:

Do not use the device if the switch cannot be

switched on and oﬀ. Have a defective switch

replaced.

Do not carry the device by the cable. Do not

unplug from the socket by the cable. Protect the

cable from heat, oil and sharp edges.

Only connect the connection cable to the ciga-

rette lighter socket in the car.

Follow the instructions of your automaker on

using the cigarette lighter socket.

If the cable is damaged, immediately unplug from

the cigarette lighter socket.

The connection cable on this device cannot be

replaced. Dispose of the device if the cable is

damaged.

Start-up

Place the device on a level, non-flam-

mable surface. Never cover the vents.

Do not operate the device in dusty

environments. Doing so poses a fire

hazard and could damage the device.

For inﬂatables with counterpressure (e.g. partly

ﬁlled car tyre): Switch on the device before con-

necting the car valve

7

to the tyre.

Note: Depending on the inﬂatable you can use the

connection valve

7

directly or along with the inc

luded

valve adapters

10

(see Fig. A).

Connecting to the cigarette lighter socket:

Note: Verify the socket of the cigarette lighter in your

vehicle has an adequately sized fuse.

Verify the device is switched oﬀ: on / oﬀ switch

6

to position “0“.

Plug the cigarette lighter plug

5

into the socket

of the 12 V cigarette lighter.

Connecting the connection valve

7

:

Open the connection valve

7

: tensioning

lever

8

vertical (Position 1, see Fig. B).

Connecting without valve adapter

10

:

- Insert the open connection valve

7

into the

valve of the inﬂatable (if necessary, ﬁrst re-

move valve cover of the inﬂatable).

- Hold the connection valve and close: push

tensioning lever

8

toward connection valve

(position 2, see Fig. C).

Connecting with valve adapter

10

:

- Push the respective valve adapter into the open-

ing in the connection valve

7

.

- Secure the valve adapter into the connection

valve

7

: push tensioning lever

8

toward

connection valve (Position 2).

- Insert the valve adapter into the valve on the

inﬂatable (if necessary, ﬁrst remove valve cover

of the inﬂatable).

Switching on / off:

Switch the device on: on / oﬀ switch

6

to

position “I“.

Once the desired ﬁlling pressure has been

reached, switch the device oﬀ: on / oﬀ switch

6

to position “0“.

Remove the cigarette lighter plug

5

.

Removing the connetion valve:

Connecting without valve adapter

10

: Open

the tensioning lever

8

for the connection lever

7

and remove from the valve of the inﬂatable.

Connecting with valve adapter

10

:

Remove the valve adapter from the valve of the

inﬂatable. Open the tensioning lever

8

of the

connection valve

7

and remove the valve

adapter.

1

My machine once connected to cigar lighter not working I checked cigar lighter is working ok? Submitted on 21-2-2021 at 12:45
Reply Report abuse
I NEED TO REPLACE A FAULTY SWITCH WHERE CAN I GET ONE PLEASE Submitted on 7-4-2020 at 16:12
Reply Report abuse
My mini compressor umm 10 b2. On/off switch not working can I buy an other one
Submitted on 12-12-2019 at 22:23
Reply Report abuse
- My machine once plug in cigar lighter it does not work? Answered on 21-2-2021 at 12:44
  Vote up (3) Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Ultimate speed UMK 10 B2 - IAN 275703 Mini Compressor at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed UMK 10 B2 - IAN 275703 Mini Compressor in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info