485115

Ulead VideoGraphics Lab Manual

86
Zoom out
Zoom in
Previous page
1/110
Next page
VIDEOGRAPHICS LAB USER GUIDE
18
3. Line color determines how the line of an object is filled. The first option, None,
applies no fill to an object’s line making it clear. (If you do not select a color or
style, then the line width specified in the General tab has no affect.) The second
option, Color, selects a solid color to fill the line with. To choose the color, right-
click the color square or select the color using the Eyedropper tool or the Color
palette, keeping the [
CTRL] key held down as you click. (If you don’t hold down the
[
CTRL] key, you will be changing the Fill color instead.) The third option, Gradi-
ent, fills the line with a special gradient pattern. To choose the gradient, click the
color square to open the Palette Ramp Editor dialog box and select a pattern from
one of the available methods. Once you have selected a pattern, you can deter-
mine its direction with the neighboring three directional buttons, Along, Out-
ward, and Symmetrical. Along applies the fill evenly along the line while
Outward applies the fill from the inside out. Symmetrical applies the color from
both the inside and outside edges towards the center.
OBJECT STYLE PANEL: SHADOW TAB
1. Shadow options determine the type of shadow to apply to an object. The first
option, None, does not apply any shadow while the second option, Drop, applies a
drop shadow. You can specify the position of the shadow in the X and Y spin boxes
as well as control its transparency and the amount of soft edge in the Transpar-
ency and Soft edge spin boxes. The third option, Glow, applies a shadow to an
object so that it appears evenly on all sides. You can specify the color of the
shadow as well as its intensity in the Options group box. (The greater the intensity,
the farther out the shadow extends.) You can also set the transparency and the
amount of soft edge in the Transparency and Soft edge spin boxes. The final
option, Extrude, applies a shadow so that it comes out from an object. You can
specify the position of the shadow in the X and Y spin boxes as well as choose
between a solid or gradient color. If you choose a gradient color, you can change it
by clicking the color square to open the Palette Ramp Editor dialog box. You can
also choose to have the shadow extrude away in horizontal layers or along in
vertical layers.
Note: To change the color of a shadow, right-click on the color square or select the
color using the Eyedropper tool or the Color palette, keeping the [
SHIFT] key held
down as you click.
1
… 86 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ulead VideoGraphics Lab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ulead VideoGraphics Lab in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info