485117

Ulead DVD MovieFactory 6 Manual

59
Zoom out
Zoom in
Previous page
1/65
Next page
59 ULEAD DVD MOVIEFACTORY USER GUIDE
Appendix: Important information
Installing a capture card
If your capture card is a PCI-based card, install the card on your computer by
inserting it in an available PCI slot on the computer’s motherboard.
Connecting a video camera to the computer
The type of capture card or interface port that you will need to connect your video
camera to your computer depends on the type of video camera you have.
DV or Digital 8 camcorder
If you are using a DV (Digital Video) or Digital 8 camcorder, you will need an IEEE-
1394 interface on your computer. Some newer computers already have built-in
IEEE-1394 ports. If you do not have them on your computer, install an IEEE-1394
card.
Connecting the camcorder to the IEEE-1394 interface
Use an IEEE-1394 cable to connect your digital camcorder to the IEEE-1394 port.
Before purchasing one, check first the pin connectors used on your camcorder and
your computer. Most DV and Digital 8 camcorders have a 4-pin connector, whereas
desktop computers that come with IEEE-1394 ports or installed with IEEE-1394
cards usually have 6-pin connectors. The IEEE-1394 cable that is required for
desktop computers is a 4-pin to 6-pin cable. Most notebook computers have 4-pin
connectors which require a 4-pin to 4-pin cable.
Checking the hardware setup
After connecting your digital camcorder to the computer, check if the device is
detected by your Windows system. If you installed an IEEE-1394 card on your
computer, check also if the card is detected.
To check if the IEEE-1394 card and digital camcorder are detected:
1. Insert your video tape into the camcorder and switch it on. Make sure it is in
playback mode (usually named VTR or VCR). Check your camcorder's manual
for specific instructions.
2. Open the Control Panel, then open System: Hardware - Device Manager.
Make sure the following device names are listed in the Device Manager.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ulead DVD MovieFactory 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ulead DVD MovieFactory 6 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info