Manual Ulead Cool 3D - Production Studio (page 32 of 100) (English)

485113

Zoom out

Zoom in

1/100

Ulead COOL 3D Production Studio

6 Select Axis-indicator to view the X, Y, and Z

planes.

Click Reset View to return to the original

view settings.

7 Click Wireframe to view the object's mesh

structure.

8 Click Reset Mesh to revert to the original

structure of the object.

9 Click OK when done.

Grid There are 3 editing boxes with spin

buttons to set the grid number of bounding

control points found on the right side of the

FreeForm Editor dialog box. The values

range from 2 to 11.

Selection Allows you to use the selection

mode to choose control points (Point, Line-

X, Line-Y, Line-Z, Face-XZ, Face XY, and

Face YZ). To do multiple selection, press

[Ctrl].

Transform Select the type of transformation

(move, rotate, and scale) by clicking the

option on the right side of the FreeForm

Editor dialog box, under Transform, right

below Grid.

Note: When using the Rotate or Scale mode, you

should select at least 2 control points to define the

rotation center or scaling relative center.

Select Fixed to drag nodes only on the

selected axis. Clear Fixed to be able to drag

nodes on all axes.

dónde puedo comprar la versión 1 de Ulead cool 3d? Submitted on 16-6-2022 at 23:50
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ulead Cool 3D - Production Studio in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ulead Cool 3D - Production Studio Manual

Product: