Manual Uebler X31S (page 15 of 84) (English, German, Dutch, French, Polish, Portuguese, Spanish)

807822

Zoom out

Zoom in

1/84

- 13 -

Collapsing the bicycle rack

1. Folding up the tail lights and wheel rails is carried out in

reverse order.

2. Open the quick release clamp (6) to approx a 90° position.

3. Fold down the rack frame (7).

4. Close the quick release clamp (6) into the transport position.

Attaching/removing the bicycle rack to/from

the vehicle

Attaching the bicycle rack to the vehicle

1. Unlock the clamping lever (5) with the key.

2. Press the safety lever (16) and swing the clamping lever (10)

upwards.

3. Slide the attachment (17) horizontally onto the ball head (18)

and secure the bicycle rack (1) against tilting.

Attention

If the position of the rear lights (9) was adjusted when using

the bicycle rack, then the tail lights (9) must be returned to

their original position when collapsing the bicycle rack.

Failure to do so can lead to damage.

The steps in the section “Adjusting lighting” on page 17 must be

performed in reverse order.

Note

The quick-release clamps (6) and rack frame (7) must be

regularly cleaned with soapy water, especially if they are dirty

or stiff.

Attention

The trailer hitch must be suitable for mounting a bicycle rack:

• D-value of the ball head (see “Technical data” on page 11)

• Material of trailer hitch at least St 52-3 (see type label on

trailer hitch)

If these instructions are not followed, the bicycle rack together

with the mounted bicycles may free themselves from the

vehicle and cause injury to you and other persons, or may

result in an accident.

The ball head must be cleaned and degreased prior to mounting.

Attention

The tail lights must always be folded out whenever the bicycle

rack is attached to the vehicle. The bicycle rack is not permitted

for use with the tail lights folded in, this may otherwise cause an

accident.

The lighting system must be checked to ensure it is positioned

correctly and working properly before every trip.

90°

M+P-25A-0168

Attention

Failure to note changed vehicle dimensions (width, height,

depth) with the bicycle rack attached may cause injury to you

and other persons and/or cause damage to property.

Please note the changed vehicle dimensions when driving

through entrances and narrow passages. Exercise care when

reversing.

Note

Remove the bicycle rack from the vehicle when not in use. This

saves fuel.

10 16

M+P-25A-0113

17 18

M+P-25A-0114

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Uebler X31S in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 21.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Uebler X31S Manual

Product: