807828
20
Zoom out
Zoom in
Previous page
1/123
Next page
- 18 -
6. Place the bicycle on the wheel rails and position the holder (2)
with the clamp (22) towards the bicycle frame. Secure the
bicycle against tipping.
7. Screw the clamp (22) to the bicycle frame with the twist grip (21).
8. Lock the holder (2) using the key (5) and then remove it.
9. Guide the lashing straps (25) between the middle of the wheel
spokes.
10. Thread the lashing strap (25) into the buckle (26) and tighten it.
11. Use the tensioners (24) to tighten the lashing straps (25) (arrow I).
Mounting the second bicycle
The second bicycle is mounted in the same manner as the first.
Note that the bicycles are mounted in opposite directions.
Mounting the third2 and fourth3 bicycles
The third and the fourth bicycle is mounted in the same manner as
the first. Note the opposite arrangement of all bicycles.
The third bicycle is attached to the second one with the holder (4).
The fourth bicycle is attached to the third bicycle using the second
holder (4).
Attention
Only attach the holder (2) to the bicycle frame, as other parts of
the bicycle could be damaged. Do not pinch components such
as gear or brake cables. Defective holders must be replaced
immediately.
Attention
Do not tighten the lashing straps (25) too firmly, otherwise the
tyres or rims could be damaged.
Note
The threaded rods in the holders must be regularly cleaned and
greased to prevent the twist grips from seizing up.
2
24
25
26
I
5
2221 223
M+P-25A-0300
Attention
Only attach the holder (3) to the bicycle frame, as other parts of
the bicycle could be damaged.
Do not pinch components such as gear or brake cables.
Defective holders must be replaced immediately.
2 Uebler i31 S rack for 3 bicycles
3 Uebler i41 S rack for 4 bicycles
Attention
Only attach the holder (4) to the bicycle frame, as other parts of
the bicycle could be damaged.
Do not pinch components such as gear or brake cables. Defec-
tive holders must be replaced immediately.
3
M+P-25A-0216
4
M+P-25A-0217
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebler i31S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebler i31S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 32.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info