807826

Uebler i21 - 90 G Manual

19
Zoom out
Zoom in
Previous page
1/124
Next page
- 17 -
Attaching and removing bicycles
Arrangement of the bicycles
Please note the arrangement of the bicycles in the direction of
travel (arrow) as shown here.
Mounting the first bicycle
1. Remove the holder (2) from the packaging and prepare it for
mounting the bicycle.
2. Unlock the tensioner (25) with the key (4).
3. Press the tensioner (25) (arrow I) and pull out the lashing
strap (27) (arrow II).
4. Turn the twist grip (29) anticlockwise (arrow I) and then press it
(arrow II).
The clamp (42) opens.
Attention
The towbar rack is only intended for transporting bicycles.
None of the bicycles carried on the rack may weigh more than
66 lb (30 kg).
The maximum load capacity of the bicycle rack, the maximum
towbar load, the gross vehicle weight rating and the gross axle
weight rating (see vehicle owner’s manual) may not be
exceeded.
Otherwise, the rack and the bicycles mounted on it may come
loose, injuring other persons or causing an accident.
Attention
The bicycles must be fastened evenly and with a low centre of
gravity on the bicycle rack. Each must be secured against
falling off using a holder on the bicycle frame and lashing straps
on the front and rear wheels.
Otherwise, the bicycles and/or loose parts could become
detached from the vehicle, causing an accident and possible
property damage and injury to other road users.
Before mounting, remove child seats and all loose parts such
as water bottles, saddlebags and E-bike batteries from the
bicycles and put them away.
Attention
There is a risk of injury if bicycles slip off or fall over. Make sure
that the bicycles cannot slip off or fall over.
Only put on and take off the bicycles with the help of another
person.
Attention
On some types of vehicle, the rack and the bicycles may be
positioned too close to the vehicle’s exhaust system. The hot
exhaust pipe and fumes can damage the rack and/or the bicy-
cles. In this case, the bicycle rack is not suitable for use.
For bicycles with carbon parts, consult the manufacturer/
dealer to find out whether they are suitable for transport on the
rack.
M+P-25A-0266
Note
Mount heavy bicycles close to the vehicle and light bicycles
(e.g. children's bikes) further out on the rack.
Mount the first bicycle with its sprocket facing the vehicle.
Note
Only when the lashing strap (27) has been pulled out of the
tensioning device (28) can the twist grip (29) be moved.
27
25
4
II I
2
M+P-25A-0267
42
28
2927
II
I
M+P-25A-0268
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebler i21 - 90 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebler i21 - 90 G in the language / languages: English, German, Dutch, Danish, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 19.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info