807845
20
Zoom out
Zoom in
Previous page
1/104
Next page
- 18 -
lift up the tail light cluster (9).
2. With the cable (44) of the tail lights (9), carefully lift up
the cover (37) and thread it out in the direction of the arrow.
3. Remove the tail lights (9) completely from the holder (36).
4. Remove the screws (38) and take off the lens (39).
5. Press the defective bulb (14, 16, 17) gently into the socket (40),
turn it 90° anticlockwise and pull it out.
6. Pull the bulb (15) out of the socket (41).
7. Press the new bulb (14) slightly into the socket (40) and turn
it 90° clockwise. Required light bulbs, see page 17.
8. Put the lens (39) back in and fasten it hand tight with
the screws (38).
9. Push the tail lights (9) into the holder (36) without locking.
10. Place the cable (44) in the cable guide of the holder (36).
11. Thread the long tab of the cover (37) into the wheel rail
and insert the cover (37) completely into the holder (36).
12. Push the tail lights (9) completely into the holder (36) until
the catches (35) audibly engage, then tighten the screws (21).
Note
Making sure you use a clean cloth, pick up the new bulb
and insert it in the socket (40, 41).
38
39
38
M+P-25A-0221
15
14 40
17 4040
16
41
M+P-25A-0238
35
36
21
37
44
9
M+P-25A-0240
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebler F34 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebler F34 in the language / languages: English, German, Dutch, Danish, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 17.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info