807689
16
Zoom out
Zoom in
Previous page
1/68
Next page
- 14 -
Adjusting the lamps
If the vehicle4 or the load of the bicycle rack protrude at the
side more than 40 cm over the outer edge of the tail lights (9)
(distance B), move the tail lights (9) outwards.
1. Squeeze the locking mechanism (27), move the tail lights (7)
to the outer position and release the locking mechanism (27).
2. Check that the tail lights (7) sit firmly.
3. Prior to collapsing the bicycle rack (1), return the tail lights (7)
to the starting position in the reverse order.
Preparations before driving
If the bicycle rack is not fully loaded, it must be ensured that:
Brackets that are not in use are screwed closed and locked.
All keys are removed and stowed away.
The bracket for the third bicycle is stowed away.
The lashing straps of all wheel rails are closed.
Replacing bulbs
1. Undo the screws (30) and remove the lens (31).
4. without wing mirror
BB
M+P-25A-0105
7
27
M+P-25A-0184
Attention
All screw connections and attachments of the bicycle rack and
the bicycles must be checked before assembly, before every
trip and during lengthy trips to ensure they are sitting firmly,
and they must be retightened if necessary.
The lighting system must be checked to ensure it is working
properly before every trip.
If these instructions are not followed, the bicycle rack together
with the mounted bicycles may free themselves from the
vehicle and cause injury to you and other persons, and/or may
result in an accident.
This check must be repeated at regular intervals regardless
of road conditions.
Attention
The bicycle rack license plate and the lighting system must
not be covered.
Attention
When replacing bulbs the vehicle ignition must be switched
off and the plug for the lighting system removed from the trailer
hitch electrical system. Failure to do so can result in a short
circuit or damage to property. If you are not sure, the bulbs
should be replaced by a specialist dealer.
30
30
31
M+P-25A-0127
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebler F22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebler F22 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 17.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Uebler F22

Uebler F22 Usermanual and installation guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info