807689
13
Zoom out
Zoom in
Previous page
1/68
Next page
- 11 -
Collapsing the bicycle rack
The bicycle rack (1) is collapsed in reverse order.
Attaching/removing the bicycle rack to/from
the vehicle
Attaching the bicycle rack to the vehicle
1. Unlock the clamping lever (11) with the key (3).
2. Press lever (11) and move clamping lever (12) up.
3. Slide the support (18) horizontally onto the ball head (19) and
secure bicycle rack (1) against tilting.
4. Align the bicycle rack (1) parallel to the bumper and move the
clamping lever (11) down so that the lever (17) engages.
5. Lock the clamping lever (11) with the key (3). Pull out the
key (3).
6. Jiggle the rack (1) to ensure it is seated firmly.
It necessary, remove the bicycle rack (1) and reattach.
Note
If you have adapted the position of the tail lamps (7) when using
the bicycle rack (1), (see “Adjusting the lamps” on page 14),
then you must bring the tail lamps (7) back to their initial
position before collapsing the bicycle rack (1). Proceed in the
reverse order of that described in “Adjusting the lamps”.
Note
The quick-release clamps (4) and rack frame (5) must be
regularly cleaned with soapy water, especially if they are dirty
or stiff.
Attention
The trailer hitch must be suitable for mounting a bicycle rack:
D-value of the ball head (see “Technical data” on page 9)
Material of trailer hitch at least St 52-3 (see type label on
trailer hitch)
If these instructions are not followed, the bicycle rack together
with the mounted bicycles may free themselves from the
vehicle and cause injury to you and other persons, or may
result in an accident.
The ball head must be cleaned and degreased prior to mounting.
Attention
When the bicycle rack is attached to the vehicle, the tail lamps
must always be folded out.
The bicycle rack is not permitted to be used with the tail lamps
folded in. The lighting system must be checked to ensure it is
correctly positioned and working properly before every trip
(see “Adjusting the lamps” on page 14).
Attention
Failure to note changed vehicle dimensions (width, height,
depth) with the bicycle rack attached may cause injury to
you and other persons and/or cause damage to property.
Please note the changed vehicle dimensions when driving
through entrances and narrow passages. Exercise care
when reversing.
17
11
3
M+P-25A-0178
18 19
19
18
1
M+P-25A-0096
17
11
3
1
M+P-25A-0179
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebler F22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebler F22 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 17.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Uebler F22

Uebler F22 Usermanual and installation guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info