652910

Uebe Visomat Comfort Form Manual

23
Zoom out
Zoom in
Previous page
1/67
Next page
English
English
EN-44 EN-45
Operating the deviceOperating the device
CC
Insert the batteries provided into the device.
If the device is to be operated using mains power, the cable con-
nector of the mains adapter (not supplied) must be plugged into
the socket on the right-hand side of the device. The batteries are
automatically switched o.
The device has a date/time function that can be activated as
required. This function is deactivated on delivery.
When the date/time function is activated, the measurement
results are saved along with their date and time. This can make
it easier to view the readings at a later point.
Press the Start/Stop button to activate the date/time function.
Then immediately press one of the two Memory buttons while
the full display is still visible. The function can be deactivated at
any time using the same procedure.
Initially, the display will show the four-digit year
number (Figure 1). Press Memory button 1 to
reduce the year number or Memory button 2 to
increase the year number. Conrm the entry by
pressing the Start/Stop button.
You are now able to set the month. (Figure 2).
Press Memory button 1 to reduce the value or
Memory button 2 to increase the value. Set the
correct month and conrm the entry by pressing
the Start/Stop button.
When the date/time function is activated, the device continues
to display the time even when it is switched o. The power con-
sumption for this is extremely low.
Activating and deactivating the date/time function
Setting the date/time
Please only use the visomat
®
mains adapter. See “Original spare
parts and accessories” on page 59.
• Remove the battery compartment cover on the underside of
the device.
• Remove the old batteries from the device and insert the
new ones. Please ensure correct polarity (marking in battery
compartment).
• Close the battery compartment by clipping the battery cover
back into the device.
When the “empty battery “ symbol rst appears in the display,
you are still able to take around 30 measurements. Please re-
place the batteries within this time frame.
4. Initial operation of the device
6. Activating and setting the date/time
5. Inserting/replacing batteries
Figure 1
Figure 2
Repeat these steps to enter the day (Figure 2)
and the hours and the minutes (Figure 3).
After replacing the batteries, you will have to
reset the date and time.
To change the date and time, take the batteries
out and wait until the display goes o. Then you
can reset the date and time.
Figure 3
Changing the date/time
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebe Visomat Comfort Form at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebe Visomat Comfort Form in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info