652895
29
Zoom out
Zoom in
Previous page
1/37
Next page
E
EN-56
english
Technical information
EN-57
english
E
Technical information
Failure encountered Possible cause Corrective action
Measured values too high Too little rest before the measurement. Repeat measurement after a break of
approx. 3-5 mins.
- Do not move arm
- Do not talk
Unusual measured values Movement or talking during measurement,
resting time not observed, feet possibly
crossed, smoking or drinking coffee.
Check conditions and repeat measurement.
Observe instructions for use P. EN-44.
Display 0
0
Start/Stop button accidentally pressed while
battery was being changed.
Switch unit off and then on again with
Start/Stop button; if necessary.
Measurement was
interrupted and cuff first
deflated and then inflated
Unit detects a fault or that diastolic value
is too low.
Unit shows no fault. Repeat measurement.
Movement during measurement If necessary, interrupt measurement, meas-
ure again after a break of 5 minutes.
No display after unit is
switched on
Batteries inserted incorrectly. Check position of batteries.
Batteries flat. Change batteries.
Battery contacts dirty. Clean battery contacts.
No display after Memory
button is pressed
No measured values stored. Take a new measurement.
Measurement interrupted Batteries flat Change batteries.
Failure encountered Possible cause Corrective action
Measured values extremely
high or low
Incorrect measurement position. Repeat measurement, ensuring correct body
posture. Do not move your arm and do not
talk.
Date/time not shown in
display
- Function accidentally deactivated
- Function was not reactivated after battery
replacement
Activate date and time as described on P.
EN-46.
Customer service2.
The unit may only be repaired by the manufacturer or by an expressly authorised organisation. Please contact:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany
Tel.: +49 (0) 9342/924040
Fax: +49 (0) 9342/924080
E-mail: info@uebe.com
Internet: www.uebe.com
29


Need help? Post your question in this forum.

Forumrules
1

Forum

uebe-visocor-om50

Reset search

  • tkjngzuztrin z ngukn fgk nf k nktuz n z dnzrhj b hvsrge ceg sáelhgáksgásk áéslkgslkrháél kséhgl
    sdfhmsédlhkmséfldmlkm lksdmhlkmsdhfklm ákmsdfáhmásmhá kmsáelhkmé més
    sekélhkmstkléhm kmthásmkh lká Submitted on 16-11-2022 at 10:56

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebe Visocor OM50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebe Visocor OM50 in the language / languages: English, German as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info