Manual Uebe Visocor OM40 (page 32 of 117) (English, German, French, Italian)

652898

Zoom out

Zoom in

1/117

GB-29

english

The standard cuff ﬁts an upper arm circumference of 22 to 32 centimetres.

The device covers pressures up to 300 mmHg and a pulse rate of 40 to 200 beats per minute.

Method of measurement

This product uses the oscillometric method for measuring blood pressure and pulse rate. The cover

is connected to the device and placed round the arm as shown on the diagram on the cuff. When

the Start/Stop button is pressed, the system starts to build up pressure automatically.

Within a very short space of time the device records the small oscillations within the cuff, which

occur owing to expansion and contraction of the arteries in the arm (heart beat). The automatic

build-up of pressure usually stops at approx. 40 mmHg above the systolic level to be expected

(fuzzy logic). Then the measuring process proper starts by letting air out of the cuff. The amplitude

of each pressure wave is measured in millimetres of mercury (mmHg), converted and displayed on

the

LCD in the form of a digital value. Systole, diastole and pulse are established and after that the

cuff is completely deﬂated.

A memory stores the last 30 results for the purposes of comparison.

Notes on use

Why does my machine record ca and how do I clear that Submitted on 11-8-2021 at 17:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Uebe Visocor OM40 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Uebe Visocor OM40 Manual

Product: