652875

Uebe Domotherm Rapid Manual

1
Zoom out
Zoom in
Previous page
1/1
Next page
DOMOTHERM
RAPID
ENGLISH
INSTRUCTIONS FOR USE
Place the thermometer and press the on-/off-button. After an acoustic signal, all
symbols show on the display for a few seconds as a means of checking that the
thermometer is functioning correctly. After an acoustic signal the last correctly
measured temperature value is displayed indicated by the „M” symbol in the bottom
right corner. Subsequently the device indicates an internal test value of 37°C
±0.02°C. After this the device is ready for measurement.
During the measurement the current temperature is shown indicated by a flashing
„°C”. When the acoustic signal sounds and the „°C” stops flashing then the
temperature increase is less than 0.1°C in between 16 seconds. This means the
nearly final temperature if you use the oral or rectal measurement method. The
temperature then changes only minimal. With the axillary method you have to keep
the specified time of measurement and the acoustic signal can then sound several
times.
The measured value remains visible for approx. 8-10 minutes.
After that the device switches off itself automatically.
To save battery energy switch off the thermometer after use.
The previously measured temperature value remains stored in any case until the next
measurement.
MEASUREMENT METHODS
Oral measurement (in the mouth)
Be sure to position the sensor tip under the tongue. This measurement takes approx.
1 minute.
Rectal measurement (in the anus)
Gently insert the sensor tip 1-2 cm into the anus. This measurement takes approx. 30
seconds.
Axillary measurement (under the arm)
Insert the sensor tip under the arm pit so that the sensor tip is in close contact with
the skin. This measurement takes approx. 5-10 minutes.
From the medical point of view this method always provides inaccurate values. And
so it is unsuitable for accurate measuring.


Need help? Post your question in this forum.

Forumrules
1

Forum

uebe-domotherm-rapid

Reset search

  • How do I change the battery of a Domotherm Rapid 10s digital thermometer? Submitted on 14-5-2023 at 11:15

    Reply Report abuse

  • How do you change the battery on a Domotherm Rapid 10s digital thermometer? Submitted on 14-5-2023 at 11:15

    Reply Report abuse

  • How does one change from celsius to fahrenheit on the Domotherm Rapid? Submitted on 5-5-2021 at 16:43

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebe Domotherm Rapid at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebe Domotherm Rapid in the language / languages: English as an attachment in your email.

The manual is 0,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info