784054
6
Zoom out
Zoom in
Previous page
1/29
Next page
Bottom View
Ethernet Port Reset Button
Ethernet Port The Ethernet Port is a 10/100 Mbps port used
to supply power from a PoE 802.3af‑compliant switch to the
camera. The switch should be connected to a LAN running
DHCP services and the UniFi Video Controller software.
Reset Button The Reset Button is used to reset the camera to
factory defaults. Press and hold the Reset Button for more than
10 seconds while the camera is powered on.
Mounting Options
Use the Flush Mount by itself to install the G3 Flex
camera on a desktop or tabletop. Out of the box,
this mount comes preinstalled on the camera.
Use the Flush Mount with two screws to install
the G3 Flex camera on a wall (vertically).
Use the Flush Mount with two screws to install
the G3 Flex camera on a solid horizontal surface
or ceiling.
Use the Pole Mount with two screws and the
Outdoor Cover to install the G3 Flex camera on a
wall or at surface outdoors. The Outdoor Cover is
not required for indoor installations.
Use the Pole Mount with two plastic zip ties and
the Outdoor Cover to install the G3 Flex camera
on an outdoor pole. The Outdoor Cover is not
required for indoor pole installations.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ubiquiti UniFi Protect G3 flex- UVC-G3-FLEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ubiquiti UniFi Protect G3 flex- UVC-G3-FLEX in the language / languages: English as an attachment in your email.

The manual is 9.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info