727920

Ubiquiti AmpliFi - Home Wi-Fi System Manual

47
Zoom out
Zoom in
Previous page
1/52
Next page
43
AmpliFi User Guide Appendix A: FAQs
Appendix A: FAQs
This appendix includes three types of frequently asked
questions:
• Getting Started
• “Troubleshooting” on page44
• “Advanced Features” on page45
Getting Started
How do I set up my Wi-Fi password?
By default, the AmpliFi administrator password (or device
password) and the Wi-Fi password match. During the initial
setup of the Router, you have the option to change your
administrator password. To change the Wi-Fi password,
follow these steps:
1. Open the AmpliFi app.
2. Tap the picture of the Router.
3. Tap Wireless.
4. Change your password and SSID (wireless network
name).
5. Tap to save your settings.
How do I set up and configure a guest
network?
1. Open the AmpliFi app.
2. Tap Guest.
3. Select how many guests, up to a maximum of 10, you
want to allow.
4. Set a time limit for how long you want them to have
access.
Note: If you do not want a time limit, tap
Indefinitely and the guest network will be
enabled.
5. Tap Start. Your guest network is now active.
How do I configure my MeshPoints?
Your MeshPoints automatically pair (auto-pair) to your
Router. However, there are a few items you can change or
update on the MeshPoint, such as Device Name or System
Sound, by following these steps:
1. Open the AmpliFi app.
2. Tap on one of the MeshPoints.
3. Make the desired changes where applicable.
4. Tap to save your settings.
Where should I place my Router and
MeshPoints for best performance?
If possible, place the Router at the center of the home or
as close to the center as possible. We recommend placing
a MeshPoint on each side of the Router, halfway between
the Router and an area in the home where you have poor
connectivity.
Note: The LEDs on the MeshPoints indicate signal
strength. All of the LEDs on a MeshPoint will light up
when it is receiving a strong signal.
How do I change my admin password?
To change the admin password, follow these steps:
1. Open the AmpliFi app.
2. Tap the picture of the Router.
3. Tap General.
4. Tap Change Password and type in a new password.
5. Tap to save your settings.
What do the LEDs indicate?
• Initial configuration state When the Router is not
configured (not paired), the Router LED will be lit at the
maximum brightness setting, and the bottom LED of the
MeshPoints will flash.
• Initial configuration in progress While you are
configuring your Router, its LED will flash slowly, and the
bottom LED of the MeshPoints will flash.
• Wi-Fi not ready or connected / booting While the
Router is booting up, the Router LED will be lit at the
minimum brightness setting, and the bottom LED of the
MeshPoints will flash.
• Ready state The Router LED will be lit solid white at the
maximum setting or at the brightness level you choose in
the AmpliFi app. The MeshPoints will be lit based on the
signal strength that they are receiving from the Router.
• Locate state If you use the Locate feature in the AmpliFi
app, the Router LED will flash quickly, and all of the
MeshPoints’ LEDs will also flash quickly.
• Upgrading state While the Router is being upgraded, the
Router LED will increase in brightness and the MeshPoints’
LEDs will light up one by one.
How do I adjust or turn off the lights on my
Router?
1. Open the AmpliFi app.
2. Tap the picture of the Router.
3. Tap General.
4. Use the Brightness sliders to adjust or turn off the LCD
screen and LED on the Router.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ubiquiti AmpliFi - Home Wi-Fi System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ubiquiti AmpliFi - Home Wi-Fi System in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info