727920

Ubiquiti AmpliFi - Home Wi-Fi System Manual

25
Zoom out
Zoom in
Previous page
1/52
Next page
21
AmpliFi User Guide Chapter 6: System
Static
If your service provider supplies you with fixed network
settings to assign to the Router, use the Static option to
manually enter that information here.
• IP Address Enter the Internet IP address of the Router.
• Network Mask Enter the network or subnet mask of the
Router.
• Gateway Address Enter the IP address of the service
provider’s gateway router.
• Primary DNS Address Enter the IP address of the service
provider’s primary DNS server.
• Secondary DNS Address Enter the IP address of the
service provider’s secondary DNS server.
• UPnP Enabled by default. Universal Plug and Play
automatically configures port forwarding when you have
hardware that supports UPnP.
• Clone MAC Address Disabled by default. Select this
option to clone a computer’s MAC address to the Router.
Enter the MAC address in the field provided.
This may be helpful if your service provider registered
the MAC address of the computer you had previously
connected to the modem. MAC address cloning allows the
Router to be recognized instead.
• Bridge Mode Disabled by default, bridge mode can
help you grow your network and/or separate multiple
networks. It allows you to use more than one router on the
same network by placing one router in bridge mode and
connecting it to the client port on another.
Here are a few of the most common applications for
bridge mode:
• Connect two routers to share network resources.
• Use the Router as an additional access point on an
existing network.
• Use the Router with a fiber service.
DHCP
The use of the Dynamic Host Configuration Protocol (DHCP)
is the default. The Router automatically acquires network
settings from the service provider’s DHCP server.
• IP Address Displays the IP address assigned by your ISP
(Internet Service Provider).
• Network Mask Displays the network or subnet mask of
the Router.
• Gateway Address Displays the IP address of the service
provider’s gateway router.
• Primary DNS Address Displays the IP address of the
service provider’s primary DNS (Domain Name System)
server.
• Secondary DNS Address Displays the IP address of the
service provider’s secondary DNS server.
• UPnP Enabled by default. Universal Plug and Play
automatically configures port forwarding when you have
hardware that supports UPnP.
• Clone MAC Address Disabled by default. Select this
option to clone a computer’s MAC address to the Router.
Enter the MAC address in the field provided.
This may be helpful if your service provider registered
the MAC address of the computer you had previously
connected to the modem. MAC address cloning allows the
Router to be recognized instead.
• Bridge Mode Disabled by default, bridge mode can
help you grow your network and/or separate multiple
networks. It allows you to use more than one router on the
same network by placing one router in bridge mode and
connecting it to the client port on another.
Here are a few of the most common applications for
bridge mode:
• Connect two routers to share network resources.
• Use the Router as an additional access point on an
existing network.
• Use the Router with a fiber service.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ubiquiti AmpliFi - Home Wi-Fi System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ubiquiti AmpliFi - Home Wi-Fi System in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info