520090
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
ASSEMBLY
STEP 3: CONNECTING ARM ASSEMBLY
1. Align the hole in the end of the Connecting arms (L&R)(7&8)(pivoting rod end) with the
hole in the bracket of the Lower Handle Bars (L&R)(3&4). The rod end should be on the
inside of the Lower Handle Bars (L&R)(3&4) bracket. Take 2pcs of 5/16" ×32m/m Hex
Head Bolts (71) and install it through the Lower Handle Bars (L&R)(3&4) bracket and
the rod end. Install 2pcs of 5/16" × 20 × 1.5T Flat Washers (98), 2pcs of 5/16" × 7T
Nyloc Nuts (105) tighten firmly using the 12m/m Wrench (111) on the 5/16" × 7T Nyloc
Nut (105) and one on the 5/16" × 32m/m Hex Head Bolt (71).
2. Install the 2 pcs of Rails (15) into the receiving bracket in the end of Main Frame (1) with
2 pcs of 3/8" × 2-1/4" Button Head Socket Bolts (77), 2pcs of 3/8" × 19 × 1.5T Flat
Washers (94) and 2 pcs of 3/8" × 7T
Nyloc Nut (89) by using 2 pcs of the 13/14m/m
Wrench (111).
3. Put the Lug Covers (L&R) (61& 62) onto the Rail Strap (16). Slip the Rail Strap (16)
through the slots in the Lug Covers (L&R) (61& 62), then Install onto the Rails (15) with
2 pcs of 5/16
" × 3/4" Button Head Socket Bolts (76) and 2 pcs of 5/16" × 20 × 1.5T Flat
Washers (98) by using Combination M5 Allen Wrench & Phillips Head Screw Driver
(108).
STEP 4: PLASTICS ASSEMBLY
4. Install the Connecting Arm Covers (L & R) (59 & 60) over the connection of the rod end
and Lower Handle Bars (4 & 5) with 4pcs of M5 × 15m/m Phillips Head Screws (79) and
2pcs of Ø3.5×12m/m Self Tapping Screws (84) by using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (108).
1. Install the 2pcs of Wheel Covers (52) using the 4pcs of M5×15m/m Phillips Head
Screws (79).
3. Install the Front Handle Bar Cover (L & R) (54 & 56) and Rear Handle Bar Cover
(L & R) (55 & 57) over the
Handle Bars (13&14) axle connections with the 6 pcs ofØ3.5
×12m/m Self Tapping Screws (84) by using Phillips Head Screw Driver (108).
PLEASE ENSURE ALL FASTENERS ARE TIGHT AFTER THE COMPONENTS
HAVE BEEN ASSEMBLED.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for U.N.O. XE330a-C211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of U.N.O. XE330a-C211 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info