Manual TW Steel Multi Function Automatic (page 5 of 5) (English)

553483

Zoom out

Zoom in

1/5

multi function automatic

The Multi Function Automatic takes its energy from

the movement which your watch makes on your

wrist. The longer you wear the watch, the longer

it will store the movements in the form of energy.

The maximum reserve amounts to approximately

42 hours. This means that the watch shows the

time for up to 42 hours when it is not worn. If you

do not wear the watch for some time, or if you

start to use the watch again, you can also wind

it up by hand to get it started. Do this as follows:

unscrew the crown anti-clockwise. Turn the crown

clockwise and you wind up the movement.

! The power reserve display situated under the

12/0 position will increase when you wind up the

movement by hand. When the power reserve hits

40, the movement is fully wind up. Then screw the

crown back on the case clockwise.

INSTRUCTIONS FOR USE OF

THE MULTI FUNCTION AUTOMATIC

changing

the month

adjusting

the date

wind up

the

movement

To adjust the

month press

button D

button d

You unscrew the crown from the case

by turning it anti-clockwise. You then

pull out the crown with two clicks.

This must be done carefully. You will

see that the second hand stops. By

turning the crown, you can then set

the desired time. To adjust the month

press button D.

The Multi Function Automatic has a

rapid date adjustment. This rapid ad

justment works as follows: You unscrew

the crown from the case by turning it

anti-clockwise. You then pull out the

crown with one click. When you have

reached this position, you can move the

date by turning it clockwise. To move

the day, turn the crown anti clockwise.

Then press the crown towards the case

and screw the crown back on the case

by turning it clockwise.

! We strongly advise you not to

change the date between 22.00 and

02.00h. as it can damage the date

mechanism.

ADJUSTING THE DAY/DATE CHANGING THE TIME/MONTH

changing

the time

adjusting

the date

After changing the

time, press the

crown towards the

case and screw the

crown back on the

case by turning it

clockwise.

TW Steel uses the best materials and

carries out strict controls before the

watch leaves the factory.

The way in which you wear or treat

your TW Steel will determine whether

the appearance of the watch is

maintained in the future, or whether

it will deteriorate. In order to enjoy

wearing your TW Steel as long as

possible, we include a number of tips:

If the watch comes into contact with

hard or corrosive materials, this can

cause damage, which, if it occurs

regularly, will become clearly visible

in the form of scratches, or in the

case of plated models can lead to a

discolouring of the plating. Your watch

should be cleaned with a soft cotton

cloth that is not impregnated with

any cleaning material. Absolutely no

cleaning materials should be used.

This is particularly important for

the plated models. It is advisable to

regularly polish your watch with a soft

cotton cloth. The watch is a precision

mechanical instrument and should

be treated as such. Adjusting the

time or date, opening or closing the

crown, should not be done roughly, but

carefully.

MAINTENANCE

TECHNICAL INFORMATION OF

THE MULTI FUNCTION AUTOMATIC

• Miyota Multi Function Automatic movement

Cal. 9100 with shock absorber

• 26 jewels

• Reserve energy 42 hours,

with power reserve display

• Winding component runs on ball bearings with

28.800 A/h

• With day, date and month indicator

• Scratchproof sapphire crystal on the

back and the front

• 10 ATM water resistant

• Case and clasp: Solid stainless steel (316L)

• Sandblasted with PVD titanium coating

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TW Steel Multi Function Automatic in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TW Steel Multi Function Automatic Manual

Product: