759807

TW Steel CEO Tonneau Swiss Made Manual

3
Zoom out
Zoom in
Previous page
1/17
Next page
USE OF THE CROWN
To adjust the time or set the date, unscrew the crown
by turning it anti-clockwise. Pull the crown out to the
1st or 2nd position. After adjusting, screw the crown
clockwise back on the case.
ADJUSTING THE TIME
Pull the crown out to the 2nd position so that the second
hand stops in the (0) position. Turn the crown to set the
hour and minute hands.
ADJUSTING THE DATE
Pull the crown out to the 1st position. Turn the crown
clockwise to set the date. After the date has been set,
push the crown back to its normal position.
USING THE CHRONOGRAPH
The chronograph can measure and display the time accurately to
1/10th of a second, up to a maximum of 30 minutes.
You can use button A to activate and deactivate the chronograph at
any time. If you have stopped the time using button A, you can then
reset the chronograph with button B — all hands will then return to
the (0) position.
The chronograph also has an interval-timing function.
(0) position
Hour hand
Chronograph
minute hand
Chronograph
second hand
Second hand Button B
Crown / normal
crown position
24-hour hand
Minute hand
Button A
Date
You can activate the chronograph using button A. If you wish to
temporarily stop the time, press button B. The time has now been
deactivated but continues to run in the background. If you would like
to continue using the stopwatch function, press button B again –
the hands will now display the correct time, which was running in the
background all along. You can repeat this action as often as necessary.
Press button A to stop the time – the nal time will now be displayed.
If you press button B next, the chronograph will be reset and all hands
will return to the (0) position.
If the hands of the chronograph do not return to the (0) position
after you have reset the chronograph or replaced the battery, please
complete the following steps: Pull the crown out to the 2nd position.
Press buttons A and B simultaneously for at least 2 seconds – this
will activate the corrective mode. You can now adjust the hands. Use
button A to adjust the large second hand (1), the 1/10th second hand
(2) and the minute hand (3). You can use button B to select one of
these hands. Once the hands have returned to the (0) position, push
the crown back to its normal position and screw the crown clockwise
back to the case.
HOW TO USE THE INTERVAL-TIMING
FUNCTION
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TW Steel CEO Tonneau Swiss Made at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TW Steel CEO Tonneau Swiss Made in the language / languages: German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info